robotbugsThings I've Built
Inspector robot
This is a robot that actually does computer vision on the 8-bit Arduino. It uses a small camera to track the location of salient movement and looks around using a series of saccades. It also shows what it is seeing on a display.
High voltage generator
This was a high voltage supply that produces around 180kV DC using a neon sign transformer and dual Cockcroft Walton multiplier chains.
Rolling robot
This is a small robot for experimentation with range sensing and dynamic balance. It has two weeks and full IMU, odometry and other sensors.
Robot motion controller
This is an AVR32-based board with three high current motor controllers and sensors to enable balancing on a inverted pendulum upright robot.
ToyIQ 32-bit ARM board for toys with audio
This project is a credit card sized board with a 32-bit ARM processor and audio/midi co-processor and multiple sensor inputs and outputs. It was built to help prototype intelligent interactive toys with built-in audio processing.
Pinball 128x16 display
This is a commercial product which is a drop-in replacement for dot matrix displays for Data East pinball games.
Square root relay calculating engine
This was an art project I built over 6 years and uses 480 relays to perform floating point square roots. It won a number of prizes at Maker Faire and featured in tech exhibitions.
ben biles
Russell Kramer
Peter Noyes
Pedro Minatel
David Sanchez Falero
Yann Guidon / YGDES
ProtoVoltaics
Thomas Chanon Wangtrirat
Víctor Mayoral Vilches
Vladimir Savchenko
shane kirkbride
k-angelis
Michael Ratcliffe
The Big One
CleanRobotics
CLANDESTIGN
shager