.Stack

1. 801

   Follow this list to find out when Hackaday.io projects become available on Tindie! (hackaday.io)

   0 points • Tindie • 07/21/2017 at 16:48 • 1 comment
2. 802

   Firmware Reverse Engineering; policy?

   0 points • ziggurat29 • 07/21/2017 at 02:58 • 9 comments
3. 803

   Testing your robot on a treadmill (hackaday.io)

   0 points • PixJuan • 07/20/2017 at 20:27 • 0 comments
4. 804

   Last chance to submit ideas for the FLIR Lepton BeagleBone Blue Challenge (lepton.flir.com)

   0 points • BeagleBoard Foundation • 07/20/2017 at 00:17 • 1 comment
5. 805

   Going to DEFCON? Come hang out with Tindie & Hackaday!

   2 points • Jasmine Brackett • 07/19/2017 at 04:06 • 0 comments
6. 806

   RGGBer Dev Kit, powered by FPGA makes embedded vision development easy (www.crowdsupply.com)

   0 points • RUN.CAM • 07/16/2017 at 07:42 • 0 comments
7. 807

   PCB Design: Four PCB Marks You May See And Never Know What They Are Before (Part 2)

   -2 points • Yahya Tawil • 07/15/2017 at 17:22 • 0 comments
8. 808

   1 week left for FLIR Lepton design challenge

   0 points • oshpark • 07/14/2017 at 01:32 • 0 comments
9. 809

   LiPo Charger Design

   0 points • Wudagem • 07/12/2017 at 12:15 • 3 comments
10. 810

    Eagle CAD ULP: Never Do Calculation During Creating Parts Footprint Again

    0 points • Yahya Tawil • 07/10/2017 at 17:23 • 0 comments
11. 811

    Need a Marlin firmware and ramps board expert. (www.3dpaperprinter.com)

    -1 point • mmiscool • 07/09/2017 at 02:12 • 4 comments
12. 812

    Four PCB Marks You May See And Never know what they are before

    0 points • Yahya Tawil • 07/08/2017 at 16:10 • 1 comment
13. 813

    Chip Gracey explains multi-core Propeller II develop to Hackaday (hackaday.io)

    2 points • Mike Szczys • 06/29/2017 at 16:30 • 1 comment
14. 814

    M42 gcode instruction. Who's used it?

    -1 point • mmiscool • 06/29/2017 at 05:03 • 4 comments
15. 815

    San Diego area event for teachers on science and maker tech (www.eventbrite.com)

    1 point • Joan Horvath • 06/28/2017 at 22:42 • 0 comments
16. 816

    An Enhanced ULP for Negative Silkscreen in Eagle CAD (www.atadiat.com)

    0 points • Yahya Tawil • 06/28/2017 at 19:19 • 0 comments
17. 817

    Quick review of macOS 13 and Arduino IDE/esptool/KiCAD (www.wrightmac.net)

    0 points • Peter • 06/27/2017 at 19:42 • 0 comments
18. 818

    FLIR Lepton 3 and BeagleBone Blue Challenge

    -1 point • BeagleBoard Foundation • 06/27/2017 at 19:12 • 0 comments
19. 819

    An Introduction to Robot Operating System (ROS) (www.allaboutcircuits.com)

    0 points • Yahya Tawil • 06/27/2017 at 02:40 • 0 comments
20. 820

    Im trying to learn how hackers apply their skills and spend their free time! Click here to fill out a quick 1 min survey. Thank you so much! (divyab.typeform.com)

    -3 points • divyabudihal • 06/25/2017 at 04:03 • 0 comments
21. 821

    PCB HackChat with OSH Park at 12noon PST today (hackaday.io)

    1 point • Jasmine Brackett • 06/23/2017 at 17:22 • 0 comments
22. 822

    A Detailed Tutorial About Writing ULP's for EAGLE CAD

    0 points • Yahya Tawil • 06/23/2017 at 12:47 • 2 comments
23. 823

    New Facebook group for PCB paintings (www.facebook.com)

    2 points • oshpark • 06/23/2017 at 06:07 • 0 comments
24. 824

    Can we have a list of homebrew CPUs?

    1 point • Ed S • 06/16/2017 at 15:08 • 14 comments
25. 825

    Fun contest to find an unusual way of flashing lights (flashinglightprize.com)

    0 points • Flashing Light Prize • 06/16/2017 at 08:30 • 0 comments
26. 826

    Hackaday NYC June WORKSHOP: Lots of Bots! (hackaday.io)

    0 points • Shayna • 06/15/2017 at 18:44 • 0 comments
27. 827

    Just had my project featured on 3dprinting.com (3dprinting.com)

    0 points • mmiscool • 06/13/2017 at 16:52 • 1 comment
28. 828

    Hardware Happy Hour Chicago tomorrow night (www.meetup.com)

    1 point • oshpark • 06/13/2017 at 03:15 • 0 comments
29. 829

    ​Just posted up a new video for my 3d with web based queue and automatic ejection (www.youtube.com)

    -2 points • mmiscool • 06/11/2017 at 22:12 • 0 comments
30. 830

    Magnetic induction generator: how to design?

    1 point • Matias N. • 06/11/2017 at 15:28 • 9 comments
31. 831

    Apertus SMT workshop at Maker Faire Berlin this weekend (www.apertus.org)

    0 points • oshpark • 06/10/2017 at 11:48 • 0 comments
32. 832

    Strikethrough text fix (hackaday.io)

    1 point • Simon Merrett • 06/05/2017 at 22:22 • 0 comments
33. 833

    Call for Makers - Maker Faire Milwaukee (milwaukee.makerfaire.com)

    0 points • Pete Prodoehl • 06/05/2017 at 21:56 • 0 comments
34. 834

    using SMD adapter for PIC microcontrollers

    0 points • Est • 06/05/2017 at 07:35 • 2 comments
35. 835

    Design a PCB for the Raspberry Pi with KiCad in 20 minutes

    1 point • oshpark • 06/05/2017 at 05:15 • 2 comments
36. 836

    Intel Hacks 2017 online hackathon (intelhacks.devpost.com)

    0 points • Shayna • 06/02/2017 at 14:37 • 0 comments
37. 837

    Liftick, remote elevator button

    0 points • Yahya Tawil • 06/02/2017 at 08:42 • 0 comments
38. 838

    Clip?

    0 points • ActualDragon • 05/30/2017 at 10:53 • 3 comments
39. 839

    I want to visit your (European) Hackerspace!

    3 points • morgan • 05/28/2017 at 18:59 • 7 comments
40. 840

    World Create Day photobooth pictures up (hackaday.io)

    0 points • Jarrett • 05/28/2017 at 00:30 • 0 comments
41. 841

    Anyone here with a Dymo Letratag LT-100 label printer?

    1 point • Martijn • 05/27/2017 at 22:30 • 0 comments
42. 842

    HACKER/MAKER Scene in GERMANY

    0 points • ZaidPirwani • 05/27/2017 at 08:25 • 9 comments
43. 843

    Amplifier Help

    1 point • Starhawk • 05/24/2017 at 22:24 • 10 comments
44. 844

    List of UNDOs in Eagle CAD

    0 points • Yahya Tawil • 05/24/2017 at 11:03 • 0 comments
45. 845

    Free WiFi locating service?

    -2 points • electrobob • 05/23/2017 at 19:49 • 5 comments
46. 846

    SFPC Computing and Stories Summit in NYC on Thursday, June 1st (blog.sfpc.io)

    0 points • Shayna • 05/23/2017 at 15:37 • 0 comments
47. 847

    Selling industrial surplus cheap (hackaday.io)

    0 points • Marcello Graves • 05/21/2017 at 17:50 • 0 comments
48. 848

    Selling industrial surplus cheap (hackaday.io)

    0 points • Marcello Graves • 05/21/2017 at 17:50 • 2 comments
49. 849

    Help!! Loads of electronic industrial serplus. (hackaday.io)

    0 points • Marcello Graves • 05/18/2017 at 21:46 • 10 comments
50. 850

    In NYC on May 24th? Join us for Hackaday NYC May: Interactions (hackaday.io)

    0 points • Shayna • 05/17/2017 at 16:16 • 0 comments
51. 851

    Simple Arduino script to set pins high, low, input, pull up, or analog/servo, clock out data, with timing, and read all or a single pin back via serial IO. (gist.github.com)

    1 point • James Newton • 05/16/2017 at 18:51 • 4 comments
52. 852

    San Diego North County Mini Maker Faire coming Fathers Day next month (northcounty.makerfaire.com)

    0 points • James Newton • 05/16/2017 at 18:50 • 0 comments
53. 853

    MakerFaire Berlin 2017

    2 points • davedarko • 05/16/2017 at 13:49 • 3 comments
54. 854

    Schematic help with arduino clone board (payment in stepper motors) (hackaday.io)

    0 points • Marcello Graves • 05/15/2017 at 12:17 • 2 comments
55. 855

    Portable air tank

    0 points • ActualDragon • 05/14/2017 at 17:57 • 22 comments
56. 856

    Software for inverse parallel kinematic equations

    0 points • Hacker404 • 05/11/2017 at 05:18 • 10 comments
57. 857

    Software for inverse parallel kinematic equations (hackaday.io)

    0 points • Hacker404 • 05/11/2017 at 05:12 • 0 comments
58. 858

    Looking for someone to build dev boards

    0 points • Peter Walsh • 05/07/2017 at 00:39 • 1 comment
59. 859

    Internet of Useful Things

    -1 point • Patrick Van Oosterwijck • 05/03/2017 at 18:24 • 3 comments
60. 860

    Open Source Digital Design Insights launches with Krste Asanović interview (abopen.com)

    0 points • oshpark • 05/03/2017 at 16:28 • 0 comments
61. 861

    Using matter controls slicer matterslice.exe (hackaday.io)

    0 points • mmiscool • 05/03/2017 at 03:55 • 0 comments
62. 862

    Crowd Funding #TindieChat today (May 2) at 1pm PT. In the Tindie Dog Park (hackaday.io)

    0 points • Jasmine Brackett • 05/02/2017 at 16:19 • 0 comments
63. 863

    Why use an inject printer and a 3d printer at the same time?? (hackaday.io)

    0 points • mmiscool • 05/02/2017 at 14:14 • 0 comments
64. 864

    IP Whiteboard project (hackaday.io)

    0 points • Enceladus • 05/02/2017 at 02:47 • 0 comments
65. 865

    How to send data to a Wireless DMX Receiver

    0 points • borazslo • 05/01/2017 at 09:15 • 7 comments
66. 866

    Project Idea

    0 points • Craig Hissett • 05/01/2017 at 00:52 • 0 comments
67. 867

    Looking for someone with design skills (3D Print) to contribute to my meow! project. (hackaday.io)

    0 points • Chrischi • 04/27/2017 at 10:48 • 3 comments
68. 868

    Calling all dream killers (hackaday.io)

    0 points • morgan • 04/25/2017 at 23:55 • 2 comments
69. 869

    #BringAHack after Maker Faire Bay Area 2017 (blog.oshpark.com)

    2 points • oshpark • 04/25/2017 at 23:35 • 1 comment
70. 870

    Any experts out that at hacking the marlin firmware for 3d printers (hackaday.io)

    0 points • mmiscool • 04/22/2017 at 13:44 • 7 comments
71. 871

    Made some progress on the 3D print auto eject system (hackaday.io)

    1 point • mmiscool • 04/21/2017 at 04:18 • 0 comments
72. 872

    "Tweeting" to Hackaday.io followers

    0 points • Patrick Van Oosterwijck • 04/20/2017 at 20:06 • 6 comments
73. 873

    Iron man armor being made (hackaday.io)

    -2 points • WalkerDev • 04/20/2017 at 17:49 • 0 comments
74. 874

    DSP chip suggestions?

    0 points • Andrew Bolin • 04/20/2017 at 11:14 • 4 comments
75. 875

    Looking for PCB design review

    1 point • tyspa • 04/19/2017 at 00:03 • 8 comments
76. 876

    Better alternative for a 28byj-48 Stepper Motor

    0 points • SephenDeVos • 04/16/2017 at 11:13 • 0 comments
77. 877

    Creating a new List "Alternative Displays"

    1 point • SephenDeVos • 04/15/2017 at 13:13 • 2 comments
78. 878

    Any hacker-educators out there?

    -1 point • Joan Horvath • 04/13/2017 at 23:17 • 0 comments
79. 879

    Sourcing a handful of Capacitors

    0 points • Greg Kennedy • 04/12/2017 at 23:35 • 4 comments
80. 880

    Neopixels help. Help with sunrise/sunset lighting

    0 points • dannyritchie • 04/12/2017 at 20:34 • 9 comments
81. 881

    Community interest in PocketBone KiCAD design?

    0 points • BeagleBoard Foundation • 04/12/2017 at 17:53 • 0 comments
82. 882

    Scientific Maker event in Hawaii in June; entry deadline 4/23

    1 point • Joan Horvath • 04/11/2017 at 19:28 • 0 comments
83. 883

    Advices/infos about USB-connected

    0 points • Yann Guidon / YGDES • 04/09/2017 at 01:42 • 10 comments
84. 884

    Traces across perforated break-away PCB sections

    0 points • Patrick Van Oosterwijck • 04/06/2017 at 17:05 • 7 comments
85. 885

    Good Servos For Hexapod

    1 point • ActualDragon • 04/06/2017 at 17:03 • 2 comments
86. 886

    Grove Experiences, anyone?

    0 points • Craig Hissett • 04/05/2017 at 14:19 • 1 comment
87. 887

    Hackaday NYC: World Create Day (hackaday.io)

    3 points • Shayna • 04/04/2017 at 19:38 • 0 comments
88. 888

    ePaper Display: 2.13", 3-Level Grayscale + Red, $10 at qty 20

    1 point • oshpark • 04/01/2017 at 18:57 • 11 comments
89. 889

    Building a DIL-08 package in Eagle CAD in less than 60 sec Using "LibIt" ULP (www.element14.com)

    0 points • Yahya Tawil • 04/01/2017 at 03:09 • 1 comment
90. 890

    How to add more than 6 images to Gallery?

    0 points • Dylan Brophy • 04/01/2017 at 02:43 • 2 comments
91. 891

    Uptime (www.wrightmac.net)

    0 points • Peter • 03/30/2017 at 18:56 • 0 comments
92. 892

    Call for Projects: The 8th Annual Interactive Show @ NYC Resistor (www.nycresistor.com)

    2 points • Shayna • 03/29/2017 at 14:58 • 0 comments
93. 893

    Wheeled robot kinematics

    0 points • Simon Merrett • 03/28/2017 at 22:01 • 13 comments
94. 894

    Batteries charging batteries, Help with some details?

    0 points • funguy_211 • 03/25/2017 at 16:13 • 5 comments
95. 895

    What's the value of this historic computer stuff?

    0 points • alan • 03/23/2017 at 17:28 • 16 comments
96. 896

    Oled modules burn in?

    1 point • electrobob • 03/23/2017 at 12:56 • 8 comments
97. 897

    Alternative to HT16K33 for a common-anode bi-color matrix?

    1 point • deʃhipu • 03/22/2017 at 19:26 • 5 comments
98. 898

    Making a list???

    0 points • Dylan Brophy • 03/22/2017 at 03:40 • 1 comment
99. 899

    *Good quality* components for a project

    1 point • Peter • 03/21/2017 at 21:05 • 7 comments
100. 900

     3D printing help

     0 points • ActualDragon • 03/21/2017 at 18:09 • 0 comments