0%

0%

Alessandro

A random guy making random things

Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/16/2019.

My Projects

A bluetooth enabled Beocom 600 Giving a new purpose to a beautiful piece of equipment

BluEtoothOcom 600

Projects I Like & Follow

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

A PewPew with a display.

PewPew M4

dehipu deʃhipu

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

Hackaday Prize 2019

Table clock with e-paper display

Agora clock

daniel-zilinec Daniel Zilinec

Hackaday Prize 2020

A UV light curing chamber made with an old rack, some aluminum foil, and three 50W UV LEDS. An Arduino is used as a programmable timer.

UV Curing Chamber

andrs-lopez-pulzovan Andrés Lopez Pulzovan

The 2018 Hackaday Prize

Using an Wemos D1(esp8266), cheap power supply, a switch, and a temp sensor you can automate anything

Home Automation on the Cheap V2

Refresh of the Pluto programmable digital watch from Lukas / carrotIndustries. Cheaply manufacturable in 2019.

Pluto watch R2

I have a laser cutter from China, similar to the K40 (50W 4060) it works out of the box but the software stack and UX needs work.

Upgrade Budget Laser Cutter

Hackaday Prize 2019

Pick and place head providing part rotation and top/bottom machine vision in a package lighter than an E3D V6.

P2 - Pick and Place for 3D Printers

daren-schwenke Daren Schwenke

An enclosure for a hacked cassette player pickup and processor so you can listen to EMF waves

EMF Pickup Device

david-troetschel David Troetschel

A Raspberry Pi-based device that helps you learn music.

eXaTutor

Using small low-power displays as sticky notes

E-Ink Kanban/JIRA Tickets

stephen-holdaway Stephen Holdaway

This project will be the access point for my nRF24L01+ (mesh) network.

nRF24L01+ network internet access point

Peetselectronics

The led heats less. ! Now there is some small brightness in the beginning of the APA107 LED curve. What is very good!!!

Compare APA107 LED with APA102

steve-michel Steve Michel

I added underglow to my Vespa scooter using addressable LED strip and a bluetooth Arduino-compatible microcontroller.

LED Scooter Underglow (with Bluetooth)

becky-stern Becky Stern

Controller for a Mitsubishi air conditioner (Model FDC508HES3

Northcliff Home Automation Aircon Controller

View all

Bits

Daren Schwenke wrote 04/28/2019 at 18:48

Thank you for the Like and follow of the #P2 - Pick and Place for 3D Printers project!

Are you sure? yes | no

Alessandro wrote 05/02/2019 at 09:41

You're welcome!
I'm always down to support a good project, and I think you're onto something by using a 3D printer as an inexpensive pick and place machine

Are you sure? yes | no