0%

0%

Danny Bokma

Electrical engineer in hobby, study and work.

Netherlands

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/08/2015.

My Projects

A self sustained 3 to 12S lithium ion battery management system based on the STM32F303 and the LTC6803-2

DieBieMS - A 3 to 12S Battery management system

danny-bokma Danny Bokma

An attempt to an universal EtherCAT slave based on the STM32F303 and the LAN9252

DieBieSlave - An universal EtherCAT slave

danny-bokma Danny Bokma

My ongoing maximum power point tracker project for solarboat racing applications.

DieBieMPPT - PV Maximum power point tracker

danny-bokma Danny Bokma

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Get the most out of your (heltec/ttgo/aliexpress) ESP32 LoRa OLED development board

ESP32 - LoRa - OLED Module

The 2015 Hackaday Prize

Arduino compatible indoor navigation system with small form factor.

LPS Mini

gran-nordahl Göran Nordahl

Official Hackaday Prize Entry

High Altitude Balloon payload capable of streaming live pictures, gps coordinates, and data telemetry.

CUBEX

The 2016 Hackaday Prize

My attempt at making an FPGA experimenters board in a popular form factor :)

'Flea Ohm' FPGA Project

valentin-angelovski Valentin Angelovski

It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet

PoEPi: Pi Zero Power over Ethernet with PHY

The CAT Board is part of a Raspberry Pi-based hand-held FPGA programming system.

CAT Board

dave-vandenbout Dave Vandenbout

The 2017 Hackaday Prize

A opensource LoRa concentrator(think as a muti-channel receiver) using SX1301 & SX125X

LoRa-concentrator

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

mariusmotea marius.motea

One mans quest to spend less time in the basement

Monitoring washing machines

lars-knudsen Lars Knudsen

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

The 2017 Hackaday Prize

Low cost GSM GPS tracker

VALTRACK-V2 GPS Tracker

Aimless exploration with power ultrasonic applications

Playing with Power Ultrasonics

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

A BLDC motor controller with position and speed control, intended for use in medium sized robots.

OTRESC - BLDC Controller

alberto Alberto

A CameraLink to HDMI with Sobel filter demo showing the possibilities for hardware acceleration and low-power on Tulipp platform

CameraLink on the Zynq based Tulipp Platform

sundance-multiprocessor Sundance Multiprocessor

12.6v 3s 18650 inside

mchf qrp v6 protable

aprs-all-in-one APRS ALL IN ONE

An attempt to design a watch that integrates a thermal camera, whilst remaining sleek.

Thermal Watch

joshua-elsdon Joshua Elsdon

View all

Bits

Dave Vandenbout wrote 04/30/2016 at 11:58

Thanks for following the CAT Board!

Are you sure? yes | no

Danny Bokma wrote 11/25/2017 at 22:41

No problem! Love it ^^!

Are you sure? yes | no