0%

0%

Luke Valenty

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/16/2017.

My Projects

Follow this project to learn how to use FPGAs and incorporate them into your projects.

The Hobbyists Guide to FPGAs

luke-valenty Luke Valenty

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor with built-in USB, SPI flash, LDO, and MEMS clock.

TinyFPGA B-Series

luke-valenty Luke Valenty

The 2017 Hackaday Prize

Low-cost, open-source FPGA boards in a tiny form factor.

TinyFPGA A-Series

luke-valenty Luke Valenty

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

The 2017 Hackaday Prize

A dirt cheap open hardware USB-JTAG board designed to program TinyFPGA A1 and A2 boards.

TinyFPGA Programmer

luke-valenty Luke Valenty

An FPGA retro-computer Pico-ITX board you assemble with through-hole parts.

TinyFPGA Computer Project Board

luke-valenty Luke Valenty

Projects I Contribute To

A programming and communication interface for FPGAs

FPGA Helper

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

An optimized "re-mix" of Adafruit's GFX library (and LCD drivers) for Arduino (AVR).

PDQ_GFX optimzed AVR LCD graphics

The 2018 Hackaday Prize

Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.

Itsy-Chipsy: Make your own $100 chip

The 2015 Hackaday Prize

DIPFORTy1 "Soft-Propeller" Zynq-7, Dual CortexA9+ FPGA DIP40 Parallax Propeller I compatibles footprint

Soft Propeller

antti-lukats Antti Lukats

This give you trick to how you can Render your PCB in 3D image using Eagle3D and POVRay.

Render 3DPCB using Eagle3D and POV-Ray

brijesh-sondarva Brijesh Sondarva

An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.

AVR-ZIF Programmer

Tindie

A place for Tindie sellers and the community to meet and stretch their legs

Tindie Dog Park

Building on my RPi Telegraph project, the Arduino Teletype translates characters to baudot code and drives a teletype.

Arduino Teletype

ed-danis Ed Danis

04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.

Altera MAX10 Breakout Board

A mini EPD badge with bluetooth LE and SD card for standalone display

Epaper Display Badge

thomas-gonnot Thomas Gonnot

A no-nonsense keyboard for one handed typing.

Glove Keyboard

combines the simplicity of Arduino with the scalability of ZigBee. Aurbee is, essentially, a wirelessly distributed Arduino platform.

Aurbee

An AVR Protoboard built around the Atmega328P and a shield with two seven segment displays made of 5mm leds.

AVR Protoboard & SevenSegmentShield

Experimental open source micro-ecosystem for open FPGAs https://github.com/FPGAwars/apio

Apio

jess-arroyo-torrens Jesús Arroyo Torrens

Verilog module to read SNES gamepad status.

SNES Gamepad FPGA Module

Bits