0%

0%

3586394718

从事激光测距仪开发多年，是一个资深的硬件工程师。

中国四川成都

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/09/2023.

My Projects

Schematic diagram, source code, PCB, related component data sheets and suppliers, and optical part information

laser range finder

Projects I Like & Follow

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

stephen-holdaway Stephen Holdaway

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

timo-birnschein Timo Birnschein

Digital oscilloscope experiment based on Arduino

Digital oscilloscope experiment based on Arduino

The 2018 Hackaday Prize

Have some old phones lying around? Thinking what to do with them? Here's how you can use them.....!

Convert your old phone into a remote switch

vishwas-navada-b Vishwas Navada B

Supplyframe DesignLab: 2023 Hackada…

This module is based on esp32, uses arduino for programming, and the firmware is open source. It realizes the core functions of wifi transfe

Wifi Module For 3D Printer(ESP32)

Hörmann is the brand of the garage door and they have extra remotes but they are, to be fair, a bit pricey for my taste.

Hörmann Garage Door Remote Hack

Automate cell information readout from a Liitokala Lii-500 charger by tapping into it's LCD interface

Li-Ion Charger Automation

Configure your light switches with Bluetooth LE

Software Defined Lighting

kevin-kessler Kevin Kessler

AI Based Object Tracking Robot Using Arduino and HuskyLens

Arduino AI Object Tracking Robot

jithin-sanal Jithin Sanal

Hackaday Prize 2020

Using Machine Learning to simplify Twitch Chat interface for my tvhead and OBS Scene Control

Gesture Recognition Wearable

An insect-quad style robot with an IMU plus ToF lidar sensor for mapping and navigation.

Twerk Lidar Robot

jacob-david-c-cunningham Jacob David C Cunningham

LED Volume Meter is an Equalizer in the Music Systems. In which lights dancing (LEDs) can be seen according to the song,

LED VU Meter PCB design using KiCAD

Breakout a feather board to Arduino R3 Layout!

Feather R3 Adapter

Robot Arm Small with Servo Motors for 3D printing 3xMG995R or 996R + 3xMG90 or SG90

Robot Arm BRB-GS5

Semi-old electronics revitalizer

Velleman K8021 Control amplifier hack

View all

Bits