0%

0%

David S

Mechanical designer & engineer, DIY prop & cosplay tinkerer, 3D printing enthusiast

Athens, GA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/01/2020.

My Projects

Use a Raspberry Pi as a voice controlled universal remote

Voice control with RPi for any home theater device

david-s David S

Open source version of a Tonewood Amp

Piwood Amp

david-s David S

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

guy-dupont Guy Dupont

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

stephen-holdaway Stephen Holdaway

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

2021 Hackaday Prize

A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.

MiniHawk VTOL

steve-carlson Steve Carlson

A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.

ESP32 E-Paper Weather Display

Each axis: ̶$̶5̶ ̶$̶8̶ $10 motor+lead screw, 3x LM6UU, 3x 6mm x 100mm rod, 1/8in hardboard, PC case screws

Minamil 2dc: a minimal CNC mill

paul-mcclay Paul McClay

Supplyframe DesignLab: 2023 Hackada…

I developed a 6 axis robot with half a meter reach and 3kg payload. It is servo driven and features absolut encoders on all axis.

Dynamic 6-Axis Robot from scratch

adrian-prinz Adrian Prinz

We are re-engineering the old PCB board into a modern PCB for a simple swap. The goal is to get an up to date RPI computer

Reviving the TI-92 calculator into a RPI PC

2021 Hackaday Prize

A DIY digital stereo-microscope. Low cost. Open source software and hardware. For electronics inspection, soldering work and more.

Stereo Ninja

fablab-mnchen FabLab München

I designed, printed, built and tested a centrifugal water pump.

3D Printed Centrifugal Water Pump

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

The device is sufficiently accurate and uses minimum number of external components

DIY Autorange Arduino Ohmmeter

mircemk mircemk

Control two relays from Blynk or Touch Sensor using NodeMCU DHT11 sensor and LDR with real-time feedback.

Home Automation With NodeMCU LDR DHT11 Sensor

A very useful device in the laboratory of dental prosthetics for the final processing of metal structures.

Electrolytic polisher

Keep hacking. Organized.

Parts Boxes

1. Successful in europe (unheard of in US/canada) 2. Reduces ICU and MD burden 3. Fairly easy and cheap to manufacture

CPAP Helmet non-invasive ventilation

An uninterruptible power supply for Raspberry Pi that can provide more than an hour of backup power and shutdown the Pi safely.

Power PI: A Smart UPS for the Raspberry Pi

ESP32 with mpu6500, bmp280, qmc5883 and OLED display.

ESP Handheld IMU

markwarrenee markwarren.ee

View all

Bits