0%

0%

Navid sabet

Enthusiastic about designing Robotic and IoT systems. Enjoy learning new things

Shanghai

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/27/2022.

My Projects

This is a high-torque yet affordable servo motor including a low KV BLDC motor, 3d printed planetary gearbox, and BLDC driver

3D printed BLDC servo with 30Nm torque ($60)

navid-sabet Navid sabet

Up to 56V 30A, 3PWM, inline current sensing.

A simple BLDC driver module for beginners

navid-sabet Navid sabet

Projects I Like & Follow

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

jon-buford Jon Buford

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

Step-by-step instruction of running uTorrent on Raspberry Pi 2 using ExaGear Desktop

Run uTorrent on Raspberry Pi

2021 Hackaday Prize

TLDR: REDACTED is the first bipedal robot with an actual fully open-source software AND hardware stack.

REDACTED - The First Fully Open Bipedal Robot

loukas-k Loukas K.

Hackaday Prize 2019

An open-source four-legged robotics platform

Spike, the Robot Dog

michael-g Michael G

Step-by-Step guide on how Lithium Battery charger circuit works and full assitance for DIY protect charger through USB port.

DIY Protected Lithium Battery Charger (TP4056)

diy-guy-chris DIY GUY Chris

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

I built a discrete UART reciever using transistors, resistors and LEDs for my school project. It contains ZERO ICs. And it works. :)

Analogue/discrete UART reciever

jol-de-kanter Joël de Kanter

2021 Hackaday Prize

One of my most advanced projects to date. A tracked robotic development platform that [hopefully] raises the bar for hobby robotics.

Autonomous tracked robotic platform UGV

maximiliano-palay Maximiliano Palay

Building a set of controllers for Kerbal Space Program including attitude, translation, throttle and hotkey inputs

KSP Controller Hardware

Miniature rocket laucher that looks like the models from Warhammer 40k. It is controlled by an Iphone and can fire up to 10 real rockets.

Miniature Warhammer-40k-style Rocket Launcher

daniel-l Daniel L

how to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Home Automation Using Blynk & ESP32 IoT Project

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

View all

Bits