0%

0%

Olivier Godfroid

Automation and electronician

Belgium

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/28/2020.

My Projects

Connected temperature and humidity sensor Dual technology RF

IOT SENSOR

olivier-godfroid Olivier Godfroid

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

A piezo inkjet printer built from scratch

DIY Inkjet Printer

dominik-meffert Dominik Meffert

The 2017 Hackaday Prize

I reversed engineered the canbus screen in my Clio and created a bluetooth remote control to listen to webradios without touching my phone.

Smart car radio

Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

One Radio to rule them all Wifi, Bluetooth, nRF24l01p, CC2500, A7105, CYRF6936

Multiprotocol Radio

spectre Spectre

The 2017 Hackaday Prize

Control your mobile device remotely without using the touch screen

Tactile Remote Control of a Mobile Device

kyle-thomas Kyle Thomas

The 2018 Hackaday Prize

Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.

Material Linear-Actuator for Robotics

Brandon T. Wood

The 2018 Hackaday Prize

Open-Source companion robot for teaching and playing

Rhoby.The Social Robot.

ilyas-akhmetzyanov Ilyas Akhmetzyanov

Commander un relais iot avec ESP-01 via SmartThings

Relais ESP-01 iot sur SmartThings

erik-tellier Erik Tellier

Hackaday Prize 2020

This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.

WiFi Button

The smallest DIL40 8085-based computer

SDC_85

Making low power dual channel remote switch for lights.

LightFox Dual - esp8266+RF dual channel switch

andrey-kupreychik Andrey Kupreychik

a cost $1, actually even less, solution for Bluetooth 4.1

<$1 Bluetooth 4.1 Solution

2021 Hackaday Prize

Smart open source robotics project for makers and students. Combines electronics, mechanics and informatics in one system.

Delta Robot One

pascal-buerger Pascal Buerger

2021 Hackaday Prize

IoT Nixie Clock can be controlled via Arduino Cloud or Amazon Alexa thanks to the Arduino Nano 33 IoT.

Voice Controlled Nixie Clock - Alexa & IoT Arduino

marcin-saj Marcin Saj

View all

Bits