0%

0%

talha

Designing state-of-the-art hardware for social good

Pakistan

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/13/2023.

My Projects

A very minimal pedagogical 16 bit processor based on the Harvard Architecture

16 Bit CPU in Verilog HDL

Things I've Built

A 16 bit processor in Verilog

A very minimal pedagogical 16 bit processor based on the Harvard Architecture. The main components were the following: 1. Program Counter 2. Instruction Memory 3. Decoder 4. Register File 4. ALU 5. Data Memory

Projects I Like & Follow

The 2016 Hackaday Prize

A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython

Home automation: thermostat with ESP8266 & OpenHab

I love to program programmers. Yo dawg...

Microchip PIC Arduino based programmer

jaromirsukuba jaromir.sukuba

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

The device that allows to turn on/off two pairs of the outlet sockets via Web browser through Wi-Fi. Based on ESP8266 and Arduino Mini.

IoT Power Strip

dev-lab dev-lab

USB MSD Bootloader for PIC Microcontrollers

USB μC - USB PIC Bootloader

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

The 2015 Hackaday Prize

A home automation box that allows you to connect any device and be controlled by any device and optimizes electricity consumption

Beaglebone Black Home Automation

ansaf-ahmad Ansaf Ahmad

I have made a new image processing software (LAPTouch) that can convert your conventional laptop or desktop screen into touchscreen

"Laptouch" Turn normal screen into touch screen

The 2016 Hackaday Prize

Applying polymorphism to hardware enables users to do more with their devices while avoiding IoT pitfalls.

Polymorphic Hardware

trey-german Trey German

The 2015 Hackaday Prize

An opensource Web platform and cheap sensor hardware solution for the massification of Continuous-flow solution culture (hydroponics)

IoT to Feed the Next Billion

kestler Kestler

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

I use the Ada language on a STM32F4 to turn an old hard drive into a solenoid engine.

Software controlled solenoid engine

Fabien-Chouteau

The 2017 Hackaday Prize

Parametric 2D and 3D modeler written in pure javascript

jsketcher

val-erastov Val Erastov

This is the first lawn mower connected to the Internet!

IOT Lawn Mower

Raspberry-Pi smartphone

esme-chloe-kealoha-dudoit Esme Chloe Kealoha Dudoit

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

Cute heart shaped jewelry with programmable LED sequence.

Kawaii Hearts Pendant

natalia Natalia

I made a pair of I2C libraries for AVR micros with USI two-wire mode capabilities (+ a practical example with some attiny85's!)

I2C libraries for attiny85-like AVR micros

albert-gonzalez Albert Gonzalez

View all

Bits