0%

0%

Jacob

Electrical Engineer looking for a good hack...

Pennsylvania

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/13/2014.

My Projects

The 2017 Hackaday Prize

An Arduino clone based on a TI's Tiva TM4C123G (An 80Mhz ARM M4F with USB OTG)

Roadrunner (the Arduino-Tiva)

Projects I Like & Follow

The 2017 Hackaday Prize

FREE and Open Source, Arduino Due based Telescope Control GOTO

rDUINOScope Boiana

dessislav-gouzgounov Dessislav Gouzgounov

The 2017 Hackaday Prize

HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurch Ashwin K Whitchurch

The 2017 Hackaday Prize

Standalone Hardware Control Unit for use with "rDUINOScope" Firmware

GoTo Telescope Control for rDUINOScope

otto-winter Otto Winter

The 2017 Hackaday Prize

Graphical Development Environment for Arduino controller type boards

Visuino

boian-mitov Boian Mitov

cordwood + smt + jewelry + blinkies + zinc-air batteries

cyborg ring

The 2017 Hackaday Prize

A USB-flash sized GSM/GPS tracker with a wide array of features

USB TinyTracker

The 2017 Hackaday Prize

ESP32 emulating to be a cartridge

WIFI Game Boy Cartridge

The 2017 Hackaday Prize

TooWheels is a completely DIY wheelchair designed to be made everywhere in the world! www.toowheels.org

TooWheels - the opensource wheelchair

alessio-fabrizio Alessio Fabrizio

The 2017 Hackaday Prize

An electro-mechanical system designed to allow a disabled musician to play the guitar with one hand (and a foot).

Adaptive Guitar

Hackaday Prize 2020

Open Source Analog Acoustic Levitation PCB

Open LEV

john-loeffler John Loeffler

Round tracks hack: An easy way to design round tracks in KiCAD with a full DRC support.

KiCAD RF tools

maurice Maurice

The 2018 Hackaday Prize

Use a floppy-disk as a multi-frame-buffer, store audio-samples, and increase capacity to boot!

Floppy-bird

eric-hertz Eric Hertz

whowhow. whowhow. - formally known as purple rider

K.I.T.T. - KNIGHT RIDER badge/brooch

The 2017 Hackaday Prize

A go-kart with an electrical emergency braking system for our disabled son

ScottCar A Go-Kart for a special child

alain-mauer Alain Mauer

IoT Fidget Spinner with Bluetooth Low Energy and POV LED Display

Spinduino

uri-shaked Uri Shaked

A 140MHz - 3GHz 2-port T/R VNA and software

Low cost open hardware VNA

A face mask to wear on the dance floor. It has audio feedback and lots of ws2812b RGB LEDs. Yay!

I Shall Name Him: Rave Face

The 2018 Hackaday Prize

Tiled CODEC for still and moving pictures based on the 3R compaction algorithm

3RGB image lossless compression format

yann-guidon-ygdes Yann Guidon / YGDES

View all

Bits

Eric Hertz wrote 04/16/2018 at 08:01

Hey Jacob! Thanks for following Floppy-Bird!

Are you sure? yes | no

Radu Motisan wrote 06/26/2017 at 08:00

Thanks for following my project. This is part of uRADMonitor, an ambition project, and one hardware variant went as far as being a Finalist in the Hackaday Prize 2015: https://hackaday.io/project/4977-portable-environmental-monitor You can support the development of this effort by getting your own hardware, multiple variants are available, see them on www.uradmonitor.com/products , or build your own KIT1 hardware.

Are you sure? yes | no

David H Haffner Sr wrote 06/24/2017 at 15:01

Thank you for the follow :)

Are you sure? yes | no

Jacob wrote 04/28/2015 at 02:31

https://github.com/jakeson21

Are you sure? yes | no