Close
0%
0%

Jared Sanson

Embedded Systems Enthusiast / Firmware Engineer @ Microsoft Surface

Redmond, USA
Following
Send a private message
Similar accounts worth following
554 Followers
8 Following
7 Projects
599 Likes
jared-sanson
Send a private message

This user joined on 08/05/2014.

31.6k
522
28
274
An open-source "smart watch" that can be built from easily available parts, and assembled by hand. Designed for hackers
Project Owner Contributor

OSHWatch

jared-sansonJared Sanson

144.3k
381
26
218
A journey into re-purposing old laptop screens
Project Owner Contributor

LVDS Laptop Display Interfacing

jared-sansonJared Sanson

13.8k
63
25
48
Reverse engineering Outback Power's Solar Chargers so I can obtain better data for logging
Project Owner Contributor

Outback MATE Reverse Engineering

jared-sansonJared Sanson

11.3k
49
15
40
Reverse-Engineering a random MIPI-HDMI bridge from China
Project Owner Contributor

MIPI-HDMI Bridge RE

jared-sansonJared Sanson

3.9k
22
3
8
An indoor hydroponics herb garden with monitoring
Project Owner Contributor

Modern Herb Garden

jared-sansonJared Sanson

1k
292
0
7
An open-source 4-channel high-power LED driver. Perfect for driving those RGB LED strips you can get from china
Project Owner Contributor

HexLight

jared-sansonJared Sanson

View all 7 projects

Things I've Built

LED TV Coffee Table

A broken LED TV re-purposed into a coffee table complete with LED fade animations, commissioned for a friend

Subwoofer Build

A simple subwoofer with integrated class AB amplifier, circa 2009.

Class-D Subwoofer Amp

A Class-D (PWM driven) subwoofer amplifier, based around the dsPIC33F (GS) series chip. I never got around to finishing this project, but I'd like to!

Reprap Prusa Mendel

A collaboration with my flatmate - the prusa mendel open-source 3D printer!

149.8k
1.1k
53
881
High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®
Project Owner Contributor

Axiom: 100+kW Motor Controller

marcosMarcos

140.3k
489
123
392
A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments
Project Owner Contributor

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijckPatrick Van Oosterwijck

72.7k
7.1k
38
423
Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!
Project Owner Contributor

Kite : Open Hardware Android Smartphone

shree-kumarShree Kumar

66.6k
561
34
472
A set of smart dice, the same size as traditional ones, full of LEDs and Bluetooth-enabled.
Project Owner Contributor

Pixels

jean-simonetJean Simonet

40.4k
2.3k
30
283
A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.
Project Owner Contributor

HiveTracker

cedric-honnetCedric Honnet

39.5k
360
27
332
A 252 electromagnet-matrix that controls Ferrofluid
Project Owner Contributor

Fetch: A Ferrofluid Display

applied-procrastinationApplied Procrastination

30.3k
250
8
171
The Probe-Scope is an open source 60MHz 250Msps oscilloscope probe with all guts built right in, that plugs directly into your PC via USB
Project Owner Contributor

60MHz Bandwidth 250Msps Probe-Scope

mark-omoMark Omo

26.2k
1.6k
37
155
For computer vision learners, drone and robot builders, AR/VR and 360 panorama experimenters. Open source hardware.
Project Owner Contributor

StereoPi - DIY stereoscopic camera with Raspberry

eugeneEugene

24.9k
389
14
273
A USB-flash sized GSM/GPS tracker with a wide array of features
Project Owner Contributor

USB TinyTracker

paulPaul

17.8k
1.4k
15
85
EPaper monitor driven by either VGA or an Internet Connected ESP32.
Project Owner Contributor

PaperBack: A Desktop EPaper Monitor

pkPK

12.8k
139
28
97
An ESP32-based soil moisture sensor.
Project Owner Contributor

w-parasite

raphaelRaphael

12.4k
1.3k
49
120
DIY Skirt with 120 Neopixel LEDs and motion detection
Project Owner Contributor

Neopixel LED Skirt

maketveemakeTVee

10.9k
115
4
85
Low power e-paper dashboard using ESP32
Project Owner Contributor

paperd.ink

rohit-gujarathiRohit Gujarathi

7.7k
2k
10
148
Augmenting materials with electrical properties ⚡⚗️
Project Owner Contributor

PolySense

cedric-honnetCedric Honnet

5.7k
50
12
43
e-ink, BLE enabled 'smart' watch with PCB wristband
Project Owner Contributor

Schmartwatch

platinenmacherPlatinenmacher

3k
19
2
13
Experimentation with the Triad Semiconductor TS4231, control words and gen 1 lighthouses (is it possible?!)
Project Owner Contributor

TS4231 - ESP8266 Lighthouse Tracking

cnlohrCNLohr

1.6k
104
3
33
Solar-powered, weatherproof, internet-connected instrument for collecting environmental data!
Project Owner Contributor

rE-SPire | Air Quality & Environmental Monitor

acrobotic-industriesACROBOTIC Industries

545
7
0
6
CMSIS-DAP compliant Debugging Probe with SWD Protocol Support
Project Owner Contributor

SWD Programmer Stick

stefan-wagnerStefan Wagner

View all

Share this profile

Share

Bits

Patrick Van Oosterwijck wrote 08/28/2019 at 05:09 • point

Thanks for following my #wESP32: Wired ESP32 with Ethernet and PoE project!

  Are you sure? yes | no

Radu Motisan wrote 07/11/2019 at 07:53 • point

Again, thank you for following #City Air Quality 

  Are you sure? yes | no

Jared Sanson wrote 07/13/2019 at 07:29 • point

Aha I didn't realise you're also behind the uRAD project! I love how professional your projects look :)

  Are you sure? yes | no

Radu Motisan wrote 07/13/2019 at 20:02 • point

that's very kind, thank you!

  Are you sure? yes | no

ottoragam wrote 11/26/2016 at 07:09 • point

Thanks for the like!

  Are you sure? yes | no

Radu Motisan wrote 07/15/2016 at 13:01 • point

Jared, thanks for following the uRADMonitor project, the environmental monitoring network covering now, the entire planet. If you want to support the development (but also help with the Igg campaign), you can purchase one of the available detectors on https://www.indiegogo.com/projects/uradmonitor , the solderable KIT1 for instance was very well received by the Makers community, and there is also an ongoing competition on http://www.uradmonitor.com/topic/soldering-the-kit1/ . Thanks again, Radu

  Are you sure? yes | no

Roman wrote 06/06/2016 at 04:25 • point

Thanks for skulling #Multimeter +.

  Are you sure? yes | no

Roman wrote 06/06/2016 at 01:23 • point

Hi Jared, thank you for your interest in my project #Multimeter +.

  Are you sure? yes | no

nitin wrote 11/21/2015 at 13:18 • point

hye can u plz give me your email id?????

  Are you sure? yes | no

Luke Beno wrote 09/14/2015 at 00:03 • point

Thanks for the Skull

  Are you sure? yes | no

Mike Szczys wrote 10/02/2014 at 23:14 • point
Hey Jared, is your website down right now? I can't the link from your OSH Watch project to load.

  Are you sure? yes | no

Jared Sanson wrote 10/05/2014 at 06:25 • point
Hi sorry for the delay, I've been away. Seems my domain name just expired but it should hopefully be back within a day or so.

  Are you sure? yes | no

Send a private message to Jared Sanson

Become cool instantly

Create your Hackaday.io profile like Jared Sanson and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Jared Sanson", please tell us the reason.