0%

0%

Brian Ramirez

Engineering Manager. Full Time Tinkerer. Collector of random skills.

Phoenix, AZ

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/07/2023.

My Projects

A simple and small ESP32 based controller for controlling LED light strips from Home Assistant

ESP32 LED Light Controller

brian-ramirez Brian Ramirez

Projects I Like & Follow

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

Hackaday Prize 2019

Armed with a Nerf blaster. This turret tracks and shoots down micro drones, otherwise know as "Tiny Whoops"

Anti Drone Gun Turret

drew-pilcher Drew Pilcher

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

Full tutorial on how to build a conveyor belt 3D printer. I provide completely free and opensource CAD and firmware to build this printer.

Print HUGE parts with Conveyor Belt 3D Printing

swaleh-owais Swaleh Owais

reverse engineering a cheap laser engraver protocol

Hacking K3 Laser Engraver

marcel-ochsendorf Marcel Ochsendorf

Look mom, no MCU!

All-hardware frequency meter and LCR

this is easy project with simple 8 blocks How to Build your Own Spectrum Analyzer software using GNU-RADIO Companion under Win10 easy !

Build Your Own Spectrum Analyzer GNU RADIO Win10

Hackaday Prize 2019

A series of development boards aimed at making IoT development a breeze!

One IoT

louis-irwin Louis Irwin

Arduino based FM radio using the Nano and the modules: SSD1306 OLED , TEA5767 FM radio, LM386 audio amplifer and KA2284 Audio level.

Arduino FM radio

Raspberry pi project for running an operation systems such as kali Linux

Raspberry pi zero w

Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.

ESP32 Blynk IoT Project with Fan Speed Control

An update to "not GRBL" but using an ISR.

Motion Controller

agpcooper agp.cooper

View all

Bits