0%

0%

Angelote

Sparks

Spain

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/14/2018.

My Projects

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

Projects I Like & Follow

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

swaleh-owais Swaleh Owais

Hackaday Prize 2020

A modern, low-power and hackable cycling computer designed for bicycle-touring

BicycleCompanion

matias-n Matias N.

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

The 2018 Hackaday Prize

A drum machine, base synth and arpeggiator that fits in your pocket. User interface inspired by classic mod tracker software.

FATCAT: Altoids Tin Mod Tracker

A BMS that publishes Cell Voltage to a MQTT Broker

6S IOT BMS

The 2018 Hackaday Prize

A hardware and software balancing cart pole.

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zucker Philip Zucker

A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.

AVR Soldering Iron

The 2018 Hackaday Prize

Electromagnetic Lifting Module

ELM

The 2018 Hackaday Prize

Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !

Hardware assembler / EMUI

yann-guidon-ygdes Yann Guidon / YGDES

A 3d printable plastic enclosure for the 2018 Superconference badge, with a complete keyboard!

Hackaday Superconference 2018 Badge Enclosure

t-b-trzepacz T. B. Trzepacz

The 2017 Hackaday Prize

An Arduino based pocket-sized bluetooth controller for your electric longboard (or else)

Electric longboard bluetooth controller (handy)

Always fascinated with the Enigma, I'm planning to fully model (Fusion 360) and 3D print a full-scale 3-rotor Enigma.

3D Printed Enigma Machine

The 2018 Hackaday Prize

A modular design for a soft robotic molds.

Soft Robotics Modules

nelson-phillips Nelson Phillips

SW framework for making event driven programs and Remote Procedure Calls for AVRs micro controllers, single or in a network.

Event based programming+RPC for AVR

claudio-g-hutte Claudio G. Hutte

A while ago, I bought some interesting surplus tube display boards. I reverse engineered and got them working again with a custom driver.

Old Russian VFD module converted into a clock

cselzey cselzey

View all

Bits