0%

0%

Christopher Mendez

I'm an electronics engineering student, i have a YouTube channel (mcmchris), and i work with arduino, nodemcu, & python.

Dominican Republic

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/09/2018.

My Projects

Control your whole room with your voice or an app, curtains, lights, fan, temperature and more.

Arduino NodeMCU automated Room

christopher-mendez Christopher Mendez

A DIY AC dimmer with Arduino that let you control Single Phace AC motors or lights easily.

Smart DIY Arduino AC Dimmer | Drive AC Loads

christopher-mendez Christopher Mendez

Things I've Built

Bluetooth LED 100x60 matrix

It consist on a LED matrix that let you show whatever you send to it by bluetooth with an app, controling it color, and effects. It has a totally handmade enclousure and use neopixel LEDs and an ATmega32, programmed on C lenguage.

Voice Room

It consist on a IoT system that let you control your whole room with your smartphone by an app or with your voice using google assistant

Projects I Like & Follow

AVR-based bootloader and IO card for RC2014 retrocomputer

z80ctrl

jb-langston J.B. Langston

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

The ARM cores on the DE1-SoC have a AXI-Avalon bus connection the FPGA VGA controller. How fast can we make it go?

FPGA SoC ARM-VGA graphics

bruce-land Bruce Land

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

The 2017 Hackaday Prize

Z-Wave development board Z-Uno + Touch pad detector chip TTP223 + Livolo glass + Batteries CR2032

Create Z-Wave capacitive touch switch on batteries

vitaliy-yurkin Vitaliy Yurkin

Esp8266 and Mit App Inventor together for controlling robot using simple http get request.

ESP8266 wifi robot remote control using android ap

satya-sankar-sahoo satya sankar sahoo

Ever had an automatic Sliding Gate installed at your house only to open and close it manually. An easy method to get the system running.

Sliding Gate Automation

lasith-ishan Lasith Ishan

Built an autonomous ground vehicle from a recycled wheelchair. Designed to traverse outdoor environments autonomously. ROS based.

AlexBot

alex-mcclung Alex McClung

The 2018 Hackaday Prize

m-BITBEAM is a 3D printed construction set based on the Bitbeam concept including some additional parts like wheels, holders, boxes, etc.

m-BITBEAM construction set

matous-pokorny Matous Pokorny

LOFI Control is a simple gamepad-style interface app that lets you control Arduino over Bluetooth LE from iOS and Android

LOFI Control - BLE to Arduino for iOS and Android

lofi-robot LOFI Robot

Two stepper motors, two cameras and the controller with two MCUs

Optical Bingo ball reader assembly

voja-antonic Voja Antonic

Need developer for my Moto Z mod phone project

Moto Mod

yogesh.engineer.uk

The 2018 Hackaday Prize

Easy-to-use kit for building a small, autonomous, mobile robot powered by the Raspberry Pi.

RobocarPi | Raspberry Pi Autonomous Vehicle

acrobotic-industries ACROBOTIC Industries

A Eurorack 4-Step Trigger Sequencer Prototype for Modular Synthesizers.

Eurorack 4-Step Trigger Sequencer Prototype

jacob-joaquin Jacob Joaquin

Welle is an innovative device that turns any surface into a smart interface and lets you control devices or softwares with touch and gesture

Welle - Turn Any Surface into a Smart Interface

richard-mou-qingqi Richard Mou Qingqi

The pH Level Monitor project uses 4D Systems' gen4-uLCD-50DT to display the pH level of a certain substance.

pH Level Monitor

4d-makers 4D Makers

Using 3d printing to repair an AC knob for a 2001 Honda Odyssey.

2001 Honda Odyssey AC Knob Repair

shawn-gorman Shawn Gorman

Inexpensive Home Automation & Monitoring

CasaSee

View all

Bits