Close
0%
0%

Mackenzie Hauck

Computer Engineering student at the University of Alberta.

Following
Send a private message
Similar accounts worth following
2 Followers
44 Following
1 Projects
14 Likes
mackenzie-hauck
Send a private message

This user joined on 05/23/2016.

4.1k
498
4
14
Battery powered led light that looks like a fluorescent tube light.
Project Owner Contributor

LED Light Rod

mackenzie-hauckMackenzie Hauck

Things I've Built

Sound reactive shutter shade glasses

Based of the glasses done by <a href="http://ch00ftech.com"; target="_blank">ch00ftech.com</a>, uses EL wire, microphone, and lipo battery to react to music.

100W LED Flashlight

Custom designed and 3D printed case run off an RC battery, boost converter, and using a stock Intel heatsink to keep things cool.

LED Beer Pong Table

A foldable table that has 570 RGB leds, ir detectors, and is controlled by a Raspberry Pi, 2 Fadecandy boards, and Processing. Based off table from <a href="http://chexal.com"; target="_blank">chexal.com</a>

3D Printed Arc Reactor

A 3D printed Halloween prop with 15 WS2812 leds that animate and react to music.

72.8k
3.1k
32
51
Thanks to the hardwork by Richard Sloan and Ivan Grokhotkov, we can now use Arduino IDE to write sketches that would run ON the ESP8266.
Project Owner Contributor

Arduino IDE for ESP8266 Quickstart Guide

hari-wigunaHari Wiguna

51.2k
6.9k
10
291
Open source, easy to assemble type of DIY laser cutter and engraver. http://en.smartdiys.com/smart-laser-mini/
Project Owner Contributor

DIY Desktop Laser Cutter

smartdiyssmartDIYs

35.7k
205
9
109
A simple and inexpensive way to image and analyze subtle surface details on objects.
Project Owner Contributor

Affordable Reflectance Transformation Imaging Dome

leszek-pawlowiczLeszek Pawlowicz

22.9k
770
3
40
Arduino + WS2812 LED Shift Light
Project Owner Contributor

Arduino Automotive Shift Light + Tachometer

chippernutchippernut

20.3k
2.9k
8
99
A new smart mirror design.
Project Owner Contributor

Reflectrum - Smart Mirror

chris-gervangChris Gervang

14.8k
12.8k
8
161
tracking CubeSats faster, anywhere and anytime for everybody!
Project Owner Contributor

The Distributed Ground Station Network

hornighornig

12.2k
12.3k
3
20
This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.
Project Owner Contributor

Satellite Antenna Rotator Mechanical System

bharbourBharbour

6.8k
2.1k
0
25
IBDAP's objective is to become an affordable open source & open hardware CMSIS-DAP JTAG/SWD debug probe implemented using gcc & makefile.
Project Owner Contributor

IBDAP - Affordable CMSIS-DAP JTAG/SWD Debug Probe

yunfengYunfeng

6.6k
307
2
12
Using a given microcontroller system my question was: How can I make the simplest possible RF receiver.
Project Owner Contributor

Integrating RF LED Detector with ATtiny13

bkainkab.kainka

5.1k
3.1k
1
33
Use your expensive high impedance studio quality headphones with a portable media player to get the best possible sound without extra wires!
Project Owner Contributor

Bluetooth Studio Headphone Amplifier

john-augustJohn August

3.6k
913
9
34
It will electronically keep insulin cool by means of a battery, microcontroller, and peltier device.
Project Owner Contributor

Portable Insulin Pen/Bottle Cooler

sean-hodginsSean Hodgins

2.6k
2.7k
0
15
NASA cancelled this program in 2013 after spending USD260 Million. Lets see what we can do for USD260!.
Project Owner Contributor

Advanced Stirling Radioisotope Generator

mw-motorsMW Motors

1.6k
1.4k
0
5
This project is based heavily off AsherGlicks Charlie Cube. It uses a different construction method to achieve the same outcome.
Project Owner Contributor

4x4 RGB LED Cube

michael-vowlesMichael Vowles

1.5k
1.6k
0
22
Diabeto is an open hardware device that wirelessly transmits blood glucose readings from a Glucometer into a smartphone
Project Owner Contributor

Diabeto

diabetoDiabeto

1.4k
633
0
8
Open-source software to set-up,control and program robotic arms built with arduinos and servomotors
Project Owner Contributor

ARCS: arm robot control suite

fabienFabien

671
525
4
4
A key-chain sized Simon Says game based on the ATtiny85
Project Owner Contributor

Tiny Says

stefan-miticStefan Mitic

549
1.2k
1
6
A first project made for the IoT-course given at HoWEST Belgium. Simon Says implementation with the DPTechnics IoT-kit
Project Owner Contributor

Simon Says with DPT-Board

daan-papeDaan Pape

313
895
0
0
It is a home mad light Saber using a 3d printing hilt and led torch and perspecs tube
Project Owner Contributor

Home made light Saber

wes1991wes1991

View all

Share this profile

Share

Bits

Send a private message to Mackenzie Hauck

Become cool instantly

Create your Hackaday.io profile like Mackenzie Hauck and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Mackenzie Hauck", please tell us the reason.