0%

0%

Phil

Electronics is both my hobby and my job

Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Facebook

This user joined on 09/06/2025.

My Projects

Putting a non-functioning barebones keyboard back to work

Reverse engineering a old school keyboard

Fried from a previous attempt - now returning it to working order

LED Matrix display repair

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuz Clyde D. Corpuz

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

In this period of isolation, I'm trying to build an oximeter with parts already in house. An oximeter is made by two leds and a photodiode.

Oximeter do it yourself

giulio-pons Giulio Pons

Or how I try to create an exact mechanical (and functioning) replica of the Apollo Guidance Computer DSKY

Accurate Apollo DSKY Replica

mdasilva M.daSilva

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

After 45 years, the original Microtronic firmware ROM rises from the ashes and flies with new hardware!

Microtronic Phoenix

michael-wessel Michael Wessel

Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection

IoT UPS

christoph-tack Christoph Tack

Using a terminal from 1976 as home automation hub. Because we can.

ADM-3A Dumb Terminal Home Automation Hub

daniel-karpantschof Daniel Karpantschof

Electronic load that supports 3.3V-16V at 1A of current. Equipped with keypad, LCD, rotary encoder, STM32 Microcontroller and more!

Electronic Load 3.3V-16V 1A

2021 Hackaday Prize

Vintage 7 Segment displays salvaged from Kennedy Space Center control room, dating from the time of the Apollo missions

NASA Apollo / Saturn V Clock / Countdown Display

patrick-hickey Patrick Hickey

Automates a resistive water heater (aka geyser) to store excess solar power as hot water.

Water Heater Automation

DEF CON may be canceled but we are still doing a badge

AND!XOR DC28 Badge

A running hardware implementation of the AGC, block II using TTL chips.

Apollo Guidance Computer

While a simple example of putting a 8x32 matrix on an Arduino, a more in-depth look at a library for the noobs and non-career- programmers.

Arduino, HT16C32, and the Library

2021 Hackaday Prize

The true AI vision open-source robotic arm powered by Jetson Nano

JetMax: The AI Vision Robotic Arm

Meet Quad-C: A four-core ATmega328P platform built for real-time multitasking with custom task management.

Quad C

akash-asbro akash asbro

Growing radishes indoors with an ESP32: monitor soil, temp, and light; automate watering; capture time-lapses; integrate with Home Assistant

Esp32 powered indoor garden

View all

Bits