Quantity   Component name
1 × Fused Filament 3D Printer Ideally a very hackable one
1 × Stainless syringe needle approximately .5mm diameter (25G gauge), as long as possible
4 × ft 3/16" OD silicone tubing
1 × 3D printed peristaltic pump http://www.thingiverse.com/thing:454702
1 × Resin reservoir For prototype I won't be implementing a resin mixing system which will limit my working time
1 × Vat Matching dimensions of the bed of the printer
1 × Needle carrier bracket An adapter, 3D printed, that secures the needle to the 3D printer where the extruder would normally be.