Quantity   Component name
148 × M3 hex nuts http://www.mcmaster.com/#90591a121/=14hw7zf
148 × M3 washers http://www.mcmaster.com/#95610a530/=14hw7tz
150 × M3 10mm screws http://www.mcmaster.com/#%2392005a120/=14hvxsj
20 × M3 5mm screws http://www.mcmaster.com/#%2392005a114/=14hvxl7
2 × 1" plastic binding post http://www.mcmaster.com/#90249a720/=14hw9da
4 × 4mm M3 motor hub https://www.pololu.com/product/1997
8 × 35mm M3 standoffs https://www.creatroninc.com/product/35mm-m3-nylon-standoff-4-pack/
1 × Cardboard box box for the controller - internal: 21 x 16 x 6.5cm Source: a recycling bin!
1 × Pelican 1010 case internal dimensions 11.1 x 7.3 x 4.3cm https://www.mec.ca/en/product/4019-103/1010-Micro-Case
2 × 10" PVC pipes 10" pieces, diameter 1" - this could be printed instead
20 × 3D printed pieces: Base
50 × 3D printed pieces: Drive system
17 × 3D printed pieces: Arm
10 × 3D printed pieces: Scoop
4 × 3D printed pieces: Electronics
20 × 3D printed pieces: Power supply area
1 × **SEE BOM FOR ALL ELECTRONICS COMPONENTS! **