Close
0%
0%

Neon816

A 65c816-based MiniITX motherboard.

lenore-byronLenore Byron
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
8k views
13 comments
125 followers
View Gallery
This project is about the design of an 8-bit/16-bit nostalgia motherboard using currently in-production parts, and designed to interface primarily with modern peripherals.

Features based on modern peripherals:
- 2 Atari or Sega-style joystick ports. Should work with 6-button Genesis controllers, and many compatible controllers are currently in production.
- DVI-D output and HD-Audio-pinout case audio connections for modern systems.
- PC-style floppy drive controller.
- ATX power connector, including support for soft power.
- SD card connector.
- PS/2 keyboard input

Also some retro and general fun:
- Commodore serial bus.
- MIDI in and out.
- GPIO header for user IO.

It's specifications:
- Western Design Center W65c816S fully static 6502-compatible 16-bit CPU.
- 1MB of main system ram and an additional 512k of video RAM.
- 128k of Flash for system ROM image.
- Lattice XP2 8000LUT FPGA for video and audio generation.

I'm aiming for a blend of 8-bit and 16-bit generation hardware and capabilities, but with a decidedly 8-bit themed user experience.  The most important thing is the immediacy of 8-bit style computers, without complicated boot sequences, memory protection, or multi-user, multitasking operating systems.  It should be easy to just power it up and start poking ports to see what happens.

That said, I plan to add some capabilities normally seen in the 16-bit generation, including some inspiration from the Amiga, Genesis, and SNES.

The current status of the project: the hardware design is complete and all parts are in house.  Currently working on initial build and test.

A Facebook group exists for those who like that sort of thing: https://www.facebook.com/groups/339934693530749/permalink/339939710196914/

neonprog_09.tgz

Neon firmware loader for Linux.

x-gtar - 14.28 kB - 12/01/2019 at 15:07

Download

sysmanual.pdf

Neon816 Programmer's Reference Manual (Version 0.1)

Adobe Portable Document Format - 156.59 kB - 11/20/2019 at 20:04

Preview

  • A couple revisions and a lot of work later.

    Lenore Byron • 10/21/2019 at 08:30 • 0 comments

    It now boots into a Forth OS and is interactive over a serial connection.  HP serial protocol analyzer is being used as a dumb terminal here.


  • On to Rev2 and manufacturing plan.

    Lenore Byron • 06/13/2019 at 14:02 • 0 comments

    This is what the finished Rev1 looks like.  There were some issues around the joystick port, and I've added a couple features for Rev2.  I'm working on that now.

  • Video Generation!

    Lenore Byron • 04/07/2019 at 23:07 • 0 comments

    So the video generation is working.  DVI-D through a passive HDMI converter, to an HDMI small form factor monitor.  Also, the CPU is running and executing code, and I used it to configure the DVI encoder via I2C.

  • Building and Testing

    Lenore Byron • 03/23/2019 at 12:40 • 0 comments

    I'm working on building up the board.  The FPGA is programming nicely, I've got the UART working, and I'm building up all the missing parts.  Still waiting on a few connectors, and adding things as I test.


  • Oops decoupling.

    Lenore Byron • 03/21/2019 at 11:55 • 0 comments

    Had a bit of an issue sending a bitstream to the FPGA.  After some bug hunting, I realized it was just an electrical noise issue.  Added a bunch more decoupling capacitors and now I can program it.

    I'll fix that in the next revision.

  • It's alive!

    Lenore Byron • 03/20/2019 at 05:48 • 0 comments

    I built up the power supply sections, and they're working.  Then I tried to read the ID code from the FPGA - success!

    I guess my first attempt at BGA soldering worked out after all.

  • Reflowed my first BGA!

    Lenore Byron • 03/17/2019 at 21:14 • 0 comments

    I got my reflow oven working and attached my first BGA!


    I didn't know how well it would work, so I only attached the 2 parts I absolutely needed reflow for.  I'll hand solder things on as I need them for this board.

  • Boards arrived!

    Lenore Byron • 03/11/2019 at 18:08 • 0 comments

    The boards are here!  Now I need to figure out how I'm supposed to attach a BGA.

    Also I need to dig out a proper camera and take a decent picture.

View all 8 project logs

Enjoy this project?

Share

Discussions

freefuel wrote 04/18/2023 at 20:55 • point

has video output been added to this project? 

  Are you sure? yes | no

ariel.saulog wrote 06/26/2020 at 18:59 • point

Is there any chance of adding Apple IIgs support?

  Are you sure? yes | no

Felip wrote 05/03/2020 at 06:30 • point

waiting for new version

  Are you sure? yes | no

rwbaskette wrote 06/08/2019 at 20:04 • point

This is almost a ITX Apple IIgs!

  Are you sure? yes | no

Jonathan 'theJPster' Pallant wrote 03/17/2019 at 10:42 • point

I'm making something similar but with an ARM Cortex M4. Where did you get the double stacked PS/2 and DE9 headers? They look ace! Couldn't find anything good on the usual catalog retailers but the singles take so much board space. PS: Have you considered pin headers to hook up an old PC expansion plates with 2x Serial / 1x Parallel ports?

  Are you sure? yes | no

Lenore Byron wrote 03/17/2019 at 11:41 • point

I think Digikey has the DE9, but I got them from Aliexpress.  Or "will get", the lead times are pretty long and I don't have them yet.

  Are you sure? yes | no

cuvtixo wrote 03/17/2019 at 06:42 • point

I'm not really clear on how much you are thinking of this as a gaming device. Are you thinking of also providing a Basic language (or 2 or more?) so we can relive early programming experiences? Personally, though, I mostly remember a lot of frustration and failures to actually make anything but the simplest programs to work, so maybe not. My nostalgia is for the Apple IIe, but I don't know if your thinking of anything in that direction, though.

  Are you sure? yes | no

Lenore Byron wrote 03/17/2019 at 10:14 • point

That depends on if anyone likes it!  For the moment I'm focused on the hardware and digital design, but a few people are looking at software already.

  Are you sure? yes | no

Lenore Byron wrote 03/11/2019 at 22:25 • point

My old project was restored by the admins.  I'd spent a bit more time on the description the first time around, so I'm making some edits here before removing the old one.

  Are you sure? yes | no

Ekkehard Morgenstern wrote 03/11/2019 at 18:20 • point

Test comment! :) 

  Are you sure? yes | no

Dan Maloney wrote 03/11/2019 at 16:30 • point

Looks like it's sticking around so far. And good thing - looking forward to more details.

  Are you sure? yes | no

Lenore Byron wrote 03/11/2019 at 17:20 • point

I'll be posting more details soon.  The boards are currently being delivered to my workshop today, and most of the parts have already arrived.

  Are you sure? yes | no

Lenore Byron wrote 03/11/2019 at 15:27 • point

This is a repost, because the previous project just vanished without a trace.  Hopefully this one stays?

  Are you sure? yes | no

Similar Projects

32-bit m68k homebrew computer with a Motorola 68030 at its core, featuring an 8-bit ISA bus for interfacing with video cards and more.
Project Owner Contributor

Blitz - 32bit 68030 homebrew with an ISA bus

carson-herringtonCarson Herrington

I am building a (currently) 64k RAM computer with an FPGA. Now with lots of pipelining!
Project Owner Contributor

FPGA computer

dylan-brophyDylan Brophy

6502-powered game console with hardware-accelerated drawing
Project Owner Contributor

GameTank 8-Bit Retroconsole

clyde-shafferClyde Shaffer

A microATX motherboard that uses a Raspberry Pi Pico as the CPU. SuperVGA output, stereo audio, a BIOS written in Rust and not much RAM!
Project Owner Contributor

Neotron Pico

jonathan-thejpster-pallantJonathan 'theJPster' Pallant

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Neon816", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.