Quantity   Component name
4 × DRV8825 Stepper Motor Driver This breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
1 × Raspberry Pi 3 Model B+ This is a single board computer for all on board computation. 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and Power-over-Ethernet support (with separate PoE HAT)
1 × Protoboard Prototyping PCB Board Single Sided Board for installing and connecting all sensors and boards. Just keep all connections managed.
10 × Pre-Made JST Connectors 2-Pin
10 × Pre-Made JST Connectors 3-Pin
10 × Pre-Made JST Connectors 4-Pin
1 × WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want.
2 × GENS-ACE 2S 7.4V 2400 MAH Lipo Battery
1 × 16x2 LCD Display This 1602 LCD Character LCD Display 16X2 Character LCD Arduino LCD is a basic 16 character by 2 line Alphanumeric display.
4 × Toggle Switches SPDT
1 × LED 5mm Blue, Green, Red, Multicolored
1 × Triple Axis Magnetometer Breakout - HMC5883L This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done through an I2C interface.
1 × 9-Axis Attitude Sensor Module MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). It gives the perfect orientation of the object in space.
1 × KY-006 Passive Buzzer Module It can produce a range of sound tones depending on the input frequency.
1 × Stepper Motor: NEMA 17 A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque.
3 × DC-DC Buck Boost Converters This regulator can take voltage between 5-32V and convert it to voltages between 1.25-35V! Unlike standard Buck converters, this regulator can also boost the voltage as needed.
10 × Infrared Sensor for Line Following The module features a 3 wire interface with Vcc, GND and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine tune the range of operation, effective distance range is 2cm to 80cm.
4 × IR DISTANCE SENSOR GP2Y0A41SK0F Helps measure accurate distances in quickest possible way.
5 × 22 AWG Silicone Multicolored cables (Per Meter) They are flexible, easy to route, able to withstand high temperatures, and able to carry high current.