Quantity   Component name
1 × PLA Filament for printing Requires at least 100g of filament to print a single hand. Other materials like PETG may be used
1 × (Optional) NinjaFlex May be used for printing elastic and/or grip pads
1 × 1mm Elastic Cord Needed if not using NinjaFlex for elastics. At least 25cm (10") is needed
1 × 0.5-0.8mm Braided Fishing Line At least 80cm (32") is needed
1 × 2.85mm/3mm Diameter Nylon Any nylon that's 2.85mm/3mm will do. No need to print with nylon. At least 30cm (12") is needed
5 × No. 4 3/8" Counter Sunk Self Tapping Screws Alternate M2.9/M3 9.5mm Counter Sunk Self Tapping Screws
10 × No. 4 5/8" Counter Sunk Self Tapping Screws Alternate M2.9/M3 16mm Counter Sunk Self Tapping Screws
7 × No. 4 1" Counter Sunk Self Tapping Screws Alternate M2.9/M3 25mm Counter Sunk Self Tapping Screws