3-Axis Skull Mod for 12ft Skeleton

One issue some have been having with the rotation movements is the servo slipping in the clamp at the top of the interface part. I've added a new version (called Type B) that uses a Servo Gear to make this a solid connection (on the right). The gear can be purchased here: https://www.servocity.com/32p-16-tooth-15t-d1-spline-servo-mount-gear-metal/

Many of you have asked, so for those that feel brave enough to cut open their Skully, I've decided to start offering the 3D Printed Parts for sale. 

They will be listed on my Etsy page here: https://skellyparts.com

Many of you have asked, so for those that feel brave enough to cut open their Skully, I've decided to start offering the 3D Printed Parts for sale. 

They will be listed on my Etsy page here: https://skellyparts.com

UPDATE 7/4/2022: Split the 2nd Level into 2 pieces that are screwed together with 4x M3x20 screw AND added a channel in part B for the wires of the servo to pass easily. This makes printing the part easier (no mega supports).