Kyle Isom-
1Print out the 3D parts
I used ABS, 20% infill, 235°C, with rafts. Leg 4 needs supports, though I would only print supports from the print bed up (I ran into issues with rafts filling the mounting holes).
I used ABS, 20% infill, 235°C, with rafts. Leg 4 needs supports, though I would only print supports from the print bed up (I ran into issues with rafts filling the mounting holes).
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.