Quantity   Component name
1 × Waterproof case IP 67 Hard case 11.65 ”x8.35”x3.78”(Yellow)
1 × Arduino Mega
4 × Large DP3T Lever Toggle Switch R12-8 is written on the side. Only using one side of each. Came from a Radio Shack switch assortment pack.
2 × Med SPST Lever Toggle Switch SGI, no part number. Came from a Radio Shack switch assortment pack.
2 × Small SPST Lever Toggle Switch "55" on side. Came from a Radio Shack switch assortment pack.
2 × Round SPST Button Toggle Switch Came from a Radio Shack switch assortment pack.
4 × SPST Momentary button 2x Red, 2x Black
2 × Potentiometer No idea what value, doesn't really matter.
1 × 10-turn cool Potentiometer Not sure what value this one is either.
1 × Rechargeable Battery holder for 18650 x2 1865O Battery Holder Double Li-ion V8 Battery Shield by DIYMORE (Amazon)
2 × 18650 Battery
1 × Breadboard jumper wire ribbons, assorted
1 × Power Connector TBD
12 × Mounts, short, threaded hex post Screen, arduino, battery holder
4 × Mounts, long, threaded hex post mounts switch plate
1 × Plywood/thin board For mounting switches
1 × (Optional) Video Greeting Card, disassembled
1 × Thin plastic or board For Bezel mount of greeting card
1 × hot glue make everything stay in place
1 × Black Paint for the switch board
1 × White paint pen (optional) for marking the switches
20 × LED, assorted colors 5mm
20 × Resistors, 150k, 1/4W