Quantity   Component name
1 × 1L low-pressure xenon globe I purchased from plasma artist Wayne Strattman
1 × Primary circuitboard KiCAD source files + Gerbers in "files" section
1 × PCB components BoM .csv BoM file has full mfg part numbers. Interactive HTML BoM in the /bom folder of the KiCAD source files
1 × USB-C PD trigger module Adafruit HUSB238 dummy breakout
1 × JST-PH 2-pin cable assembly, 6 inch For connecting the USB-PD trigger module to the board. I hand-made mine.
1 × 40mm x 20mm 12V fan w/ 2-wire pigtail connector I used Noctua NF-A4x20 FLX
1 × 3D printed supports six pieces total -- files are on the Files page
20 × m2 x 4mm heat-press inserts
20 × m2 x 5mm cap-head screws black oxide
1 × USB-PD power supply & cable must be capable of >3.25A @ 20V