0%

0%

ITA SAO BAG

ITA bags are used for pins and plushies - comes from cringe &#x2F; painful fandom and people putting too many stickers on cars

davedarko

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

Description

I had an idea for an ITA bag but for simple add-ons. Think MOLLE or PALS but with connectors to hold the SAOs. And then there's a power supply in the bag and a transparent foil to protect them.

Details

Changed my mind on the MOLLE/PALS idea for the ITA SAO BAG. Instead I've blocked out these 5x5 cm squares and will have the connectors spread out like this instead.

Files

Screenshot 2024-10-13 at 02.55.43.png Portable Network Graphics (PNG) - 81.30 kB - 10/13/2024 at 01:06		Preview

Screenshot 2024-10-13 at 02.55.55.png Portable Network Graphics (PNG) - 104.25 kB - 10/13/2024 at 01:06		Preview

Project Logs

Collapse

power distribution boards
davedarko • 10/13/2024 at 01:03 • 0 comments

I designed them so I can use two boards for the bag, as that was cheaper. I'm using a Raspberry Pi Pico for I2C stuff and also the nice buck boost on board.
designed and ordered!
sewing the inlay
davedarko • 10/02/2024 at 11:31 • 0 comments

I decided to buy an ITA SAO bag and then sew the simple add-on inlay for it. I started like I would do welt pockets, but doing 44 of them simultaniously. You start with the two "good" sides facing each other and sew them together with the square opening you want to achieve. After sewing, I've cut the black cotton canvas material diagonally, so I could then cut a crossed hole right up to the corners and fold the flaps through the hole and basically turn it around. There are better and worse results when doing it 44 times, but this will probably hidden well enough with a lot of SAOs anyways.
I will probably cut up the wires and do the connectors next and then sew everything together.

View all 2 project logs

Discussions

Per Jensen wrote 11/04/2024 at 14:07

The title is all screwed up FYI. ""cringe" / "painful""

Are you sure? yes | no

davedarko wrote 11/04/2024 at 20:11

thanks

Are you sure? yes | no

Richard Hogben wrote 10/21/2024 at 17:11

Now this is wearable computing

Are you sure? yes | no

davedarko wrote 10/21/2024 at 17:28

controlled by the RP2040 PI COW it's basically a biggern supercon badge now :D

Are you sure? yes | no

Similar Projects

A mod for the Parrot Disco : extending its features with the VTOL abilities activated with a 4G connection

Adding a fail system to the Parrot Disco

I'm tired of not writing. I've been wanting a computer specifically for writing. Time to take care of both at once...

The Mighty Quill

Lots of "Desktop CNC" machines can fit on a desktop. But do they fit _on_your_desk_? Like, between the stapler & paper tray?

"Desk Accessory" CNC Milling Machine

paul-mcclay Paul McClay

So you've bought a house with an old intercom. Trash it? No way! Make it useful again.

Modernizing a 1960s Intercom

jorj-bauer Jorj Bauer