link drop for modding/repairing/hacking stuff

I use them for storing my projects, most of them fit just fine. The newer versions don't come with the cool sticker backside where the label goes in, so I had to research the dimensions etc, only to find out that there is a label to cut out of the instruction manual - but who reads that, right? :D Anyway, here are the dimensions of the label that I found out. Would be cool to find a label generator of some sort.

http://www.analog.com/media/en/technical-documentation/data-sheets/ADE7755.pdf

I bought two of these totally hackable current meters: https://www.conrad.de/de/energiekosten-messgeraet-basetech-em-2000-integrierte-kindersicherung-1302517.html at the mini maker faire in Berlin that is this weekend, heavily sponsored by Conrad Electronics. Probably the best about the whole mini maker faire :D @al1 was there too, so that was nice :) We laughed about the whole "wanting to be a big event" feeling, sadly there weren't many visitors around. We've met some cool people though and talked a bit and got two or three ideas for new projects. There was also no lottery to win a DJI spark. That would have been cool, without much competition. 

I'll be in America from mid September to mid October, afterwards I'll buy some new lab furniture :)

Ikea Billy 0.8m width on 3.4m
4 billys 54euros each 
216 total 

LCD Controller replacement 

• 64x32 lcd with 96 pins
• ht1650 holtek as an optional driver
  • http://www.ic-direct.com/icdirect/request/
  • http://www.holtekusa.com/displaydriver.html

scrapped, I have #LAMEBOY - another ESP12 handheld and neon pink 3D printing filament now, I don't need this anymore and it's already gone :D

http://blog.spitzenpfeil.org/wordpress/projects/youyue-858d-hotair-station-modifications/

http://www.heartoftechnology.com/project-858d-hot-air-rework-station/

https://github.com/madworm/Youyue-858D-plus

http://www.designelectronics.com.au/DesignElectronics_UT61E-APO.htm

Backlight mod

Shutdown mod