Files | Linear Delta Robot 3D printed

This gear has to be printed 3 times. It fits exactly over one of the standard horns. Please cut of exess of the horns!

- 37.00 bytes - 03/05/2017 at 15:04

This part to be printed once; it is the top of the unit.

- 55.00 bytes - 03/05/2017 at 15:04

This part to be printed 3 times. It may be necessary to sand in order to fit smoothly in the Deltatriangle parts.

- 37.00 bytes - 03/05/2017 at 15:04

This part to be printed once. It is the bottom part of the unit. The wires coming from the servo's should be put through the holes.

- 61.00 bytes - 03/05/2017 at 15:04

This part to be printed once.

- 43.00 bytes - 03/05/2017 at 15:04

Deltagear.stl This gear has to be printed 3 times. It fits exactly over one of the standard horns. Please cut of exess of the horns! - 37.00 bytes - 03/05/2017 at 15:04		Download
Deltatriangle top1.stl This part to be printed once; it is the top of the unit. - 55.00 bytes - 03/05/2017 at 15:04		Download
deltabeam.stl This part to be printed 3 times. It may be necessary to sand in order to fit smoothly in the Deltatriangle parts. - 37.00 bytes - 03/05/2017 at 15:04		Download
Deltatriangle bottom1.stl This part to be printed once. It is the bottom part of the unit. The wires coming from the servo's should be put through the holes. - 61.00 bytes - 03/05/2017 at 15:04		Download
newdeltatop1.stl This part to be printed once. - 43.00 bytes - 03/05/2017 at 15:04		Download