Instructions | Lumin Lamp

1

Go to your main PCB manufacturer and print out the PCB gerber files that are attached to this project.

Attached in the file section, you will find the Gerber File required to manufacture the PCB.
2

Assemble your night lamp

Print out all the 3d files, some of them you will need to print a few of them for instance the feet of the night lamp, there are 5. The spacers for holding the ceramic base there are 2. Optional to print is the cover that go over the components to protect them.
3

Build your coil

You'll need to print out your coil frame and wind your coil. There is one tutorial on Youtube for the time being that has been uploaded to show how to wind the coil.

The coil will be wound as a bi-filar, so 2 wires, once you have wound your coil, just connect them to the PCB 2 pin screw termnials. Wire 1 is called "Channel A" and Wire 2 is called "Channel B" on the PCB markings.

Lumin Lamp