Close
0%
0%

Starlight Skydome

The goal was to turn a 40 ft. dia. geodesic dome into a convincingly starry night sky. Mission Accomplished.

samuel-wittmanSamuel Wittman
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
10 comments
73 followers
View Gallery
Almost 500 stars were constructed individually and operated under the power of a coin cell for close to a month. Each star was adhered to the surface of the dome with adhesive, in my case, hot glue. Pay close attention to the threshold voltage across the LEDs, as reasonably priced bulk coin cells only come as high as 3V.
  • 1 × 555 timer
  • 1 × Resistor
  • 1 × Capacitor
  • 1 × PCB
  • 1 × smd LED

View all 7 components

Enjoy this project?

Share

Discussions

gmwatbot wrote 03/12/2014 at 21:24 • point
If using fabric in the future consider sewing/gluing in conductive thread. We did a small area running parallel lines an inch apart which were then alternatively hooked up to + and - to them at the edge. Treat like a flexible breadboard then to power stuff on the fabric with short hookup wires.

Works well for small areas, not sure about a 20ft wall though.

  Are you sure? yes | no

Samuel Wittman wrote 03/13/2014 at 16:15 • point
That's a great idea! I'd have preferred to do something like that, except the fabric was already up prior to creating the lights. I'll keep this in mind for next time!

  Are you sure? yes | no

BrendanMatkin wrote 02/20/2014 at 00:26 • point
Did they twinkle or something, or just static? Can you post your drive circuit?

  Are you sure? yes | no

Samuel Wittman wrote 02/20/2014 at 16:26 • point
They did twinkle, though there was definitely room for improvement in the twinkling behavior. I'll post schematics when I'm not on a mobile device. Thanks for the reminder!

  Are you sure? yes | no

Samuel Wittman wrote 02/21/2014 at 20:28 • point
Posted.

  Are you sure? yes | no

BrendanMatkin wrote 02/24/2014 at 21:25 • point
Cool, thanks! I always go to microcontrollers for stuff like this and forget that a simple electronic circuit can handle it!

  Are you sure? yes | no

mpinner wrote 01/23/2014 at 19:36 • point
brilliant. when's the next setup?

  Are you sure? yes | no

Samuel Wittman wrote 01/23/2014 at 21:22 • point
I'm considering redoing the whole project in fiber optics. This quantity of cell batteries proves a bit expensive for a consumable cost each time we set up the dome. The main drive behind batteries was that we didn't have much time, and we didn't want to worry about how we were going to distribute power over the whole thing.

The next installation is going to be a wall indoors as a particle effect, so thankfully I won't have to mount things on a 20ft high concave fabric surface.

  Are you sure? yes | no

Mike Szczys wrote 02/22/2014 at 16:40 • point
Hi Sarah,

I didn't see any info on mAh for the batteries you used. But when you mentioned consumables I wondered if you could possibly get away with a super-cap setup? I envision an inductive charging system that puts a stick with a coil on the end of it... like lighting oil lamps of yore, someone would go around each evening and juice up the caps. Whimsical, isn't it?

  Are you sure? yes | no

Samuel Wittman wrote 02/26/2014 at 17:44 • point
In response to Mike, because nested replies aren't a thing yet.

The more I think about your idea, the more I like it. I'll have to look into doing that for future installations. I can probably even modify my existing boards, rather than having to buy new ones, which is a huge plus.

  Are you sure? yes | no

Similar Projects

LM317 voltage regulator radiator case for VHF transceiver.
Project Owner Contributor

LM317 radiator case

m-saahbs-sabalaM "Saahbs" Sabala

When every last nanoamp matters. Powering projects even from LEDs
Project Owner Contributor

Electron Bucket - extreme power management module

milojkovicmilanmilojkovicmilan

Modern, compact flashes are crazy expensive, so how about making an ancient one somewhat more functional?
Project Owner Contributor

Rehabilitate a 40 year old flash

lion-mclionheadlion mclionhead

JACOB’S LADDER with ZVS flyback driver
Project Owner Contributor

How to make simple high voltage traveling arc

mircemkmircemk

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Starlight Skydome", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.