Quantity   Component name
1 × Atmega32U4 Our microcontroller, purchased here: http://www.digikey.ca/product-search/en?KeyWords=328P-Pn-ND&WT.z_header=search_go
1 × K-type Thermocouple For sensing the temperature of the thermal block, purchased here: https://www.adafruit.com/products/270
1 × Thermocouple amplifier MAX31855 Breakout Board For use with the thermocouple, purchased here: http://www.adafruit.com/products/269
1 × 100KOHM Thermistor For sensing the temperature of the heated lid, purchase here: http://www.digikey.ca/product-search/en?KeyWords=480-3135-ND&WT.z_header=search_go
1 × Roll Nichrome Wire To generate heat for the heated lid, can purchase here: http://www.amazonsupply.com/dp/B003R5024Y?ref_=sr_1_7_txt
1 × Nokia 5110/3310 monochrome LCD The screen we used. Purchased here: http://www.adafruit.com/products/338
1 × 15V 10A Power Supply To power the Peltier. Puchased here: http://www.digikey.ca/product-search/en?lang=en&site=ca&KeyWords=285-1812-ND&x=0&y=0
1 × Peltier Heats and cools the thermal block. Purchased here: http://www.digikey.ca/product-search/en?lang=en&site=ca&KeyWords=102-1682-ND&x=0&y=0
2 × 8A 5V Relays Switch the Peltier from heating to cooling and back again. Purchased here: http://www.digikey.ca/product-search/en?KeyWords=PB1015-ND&WT.z_header=search_go
2 × Buttons (one red, one green) To turn the PCR on and off. Can purchase here: http://www.adafruit.com/products/1009
1 × 16MGHz 20PF Thru Crystal For the Atmega, Purchased here: http://www.digikey.ca/product-search/en?KeyWords=XC1925-ND&WT.z_header=search_go
1 × 60V 55A Mosfet To regulate the voltage going to the heated lid. Purchased here: http://www.digikey.ca/product-search/en?KeyWords=497-6742-5-ND&WT.z_header=search_go
1 × PCB Electronic Components / Misc. Electronic Components
1 × 1 USB adaptor To program the Atmega on the PCB. http://arduino.cc/en/Main/ArduinoUSBHostShield
1 × Asoorted Passive Components Resistors and capacitors and the like for the PCB. See the parts list provided in the Dropbox as well as the PCB schematic for the exact components.
1 × Thermal Block
1 × FR4 Prototype Board The nichrome wire is embedded in this board to make the heated lid