The first Walking test

We assemble the model and try to start the walking using powerbank.

It can walk, but it walk with a limp now. We are to calculate more precise algorythm of leg changing to avoid a limp.

Discussions

Sergei V. Bogdanov wrote 05/06/2018 at 18:51

We make some corrected version of code. It can walk now.
https://youtu.be/-PBh-VfGNQc

Are you sure? yes | no

deʃhipu wrote 05/06/2018 at 19:10

Hmm, is it statically stable? Can you stop it with one of the legs up, without falling down? I think that if you made the legs longer or the body narrower, you could get a greater effect from tilting the whole body, and thus better stability.

Are you sure? yes | no

Sergei V. Bogdanov wrote 05/06/2018 at 19:19

You are right, of course. Tilting of the body is energy loss. The Robot is stable almost on all the cycle. The Stop, Go and Turn (left, right) are the next modes we designe.

Are you sure? yes | no

Sergei V. Bogdanov wrote 05/01/2018 at 15:05

Thank You. It is nice idea.

Are you sure? yes | no

deʃhipu wrote 05/01/2018 at 10:07

From my experiments with #Katka I can tell you that it helps when you tilt the body to the opposite side of the leg you are going to lift before lifting it, by making the legs on that side shorter.

Are you sure? yes | no

Installing Arduino PCBs and IMU

New Stepping Algorithm - It Can Go Now!

Discussions

Become a Hackaday.io Member