Zardoz

Components

1 × syma quadro-copter An inexpensive quad copter used in the LVL1 Quadro-copter combat event known as QUACC

1 × A paper folded Zardoz head from the internet, the true creator has serious skills, see link below http://godzillu.daa.jp/zardoz/

1 × 0.093 Acrylic sheet

4 × Carbon Fiber thin dowels

1 × Hot glue, lots of hot glue

Project Logs

Collapse

This is what should and did happen.
cabrera.101 • 04/28/2014 at 23:26 • 1 comment

http://youtu.be/m72xytB71K8
Trouble with Editting this Project is NOT Why it FAILED.
cabrera.101 • 04/28/2014 at 22:26 • 0 comments

So, the instructions did not load properly. But that does not change the results of FAILURE. To show you how it failed I am editing a video. Stay tuned.
The Face of Zardoz
cabrera.101 • 04/27/2014 at 21:20 • 0 comments

As was mentioned in the parts section, the ZARDOZ head was someone else's creation. Please look at there write up (http://godzillu.daa.jp/zardoz/). I can only say their work was impressive.
So followed the instructions and built a ZARDOZ face.
Start # 1
cabrera.101 • 04/27/2014 at 21:08 • 0 comments

So, the first issue is making it fly. To that end, a few mods to a quad-copter were undertaken. An under-frame was attached to allow a frame to be created for applying a skin outside of the propeller range.