Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Ernest likes and follows

20.5k
12.6k
302
Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.
Project Owner Contributor

FossaSat-1, Open Source Satellite

julian-fernandezJulian Fernandez

7.3k
7.5k
88
Neopixel watch with accelerometer.
Project Owner Contributor

Arduino Neopixel Watch

marcello-gravesMarcello Graves

38.4k
7.4k
24
How to power up and communicate with the cheap RCWL-0516 radar sensor module
Project Owner Contributor

First steps with the RCWL 0516 radar switch

ivorasivoras

33.2k
6.5k
188
An Off-the-grid messaging system.
Project Owner Contributor

Skrypt

taiwoTaiwo

5.1k
5.1k
43
Self-Powered IoT Node for Environmental Sensing
Project Owner Contributor

SPINES Mote

macro-yauMacro Yau

20k
3.7k
20
Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!
Project Owner Contributor

ATMega4809 developing board project

kodera2tkodera2t

8.3k
3.2k
10
How I added a 500W heater to my 3D printer to enable reliable ABS printing.
Project Owner Contributor

Enclosure Heater for 3D Printer

mark-rehorstMark Rehorst

3.2k
3.2k
13
A Network-on-Chip for the System-of-Systems Era Enabling mixed interface communication between embedded devices (MCU, sensors etc.)
Project Owner Contributor

InterNoC

lefteris-kyriakakisLefteris Kyriakakis

3.1k
3k
28
An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing
Project Owner Contributor

Protec 3D Printing

tiernanTiernan

14.1k
2.9k
51
LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.
Project Owner Contributor

LP3D: A fully lasercut kit 3D printer

luke-wallaceLuke Wallace

4.2k
2.8k
18
132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs
Project Owner Contributor

HDMI to FPGA to APA102

thomasthomas

2.6k
2.6k
17
This elegant timepiece, accentuated with a moiré pattern kinetic sculpture at its center, displays time with a vibrant array of LEDs.
Project Owner Contributor

The Moiré Clock

tamarisk-labsTamarisk Labs

12.8k
2.2k
88
the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!
Project Owner Contributor

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

igorIgor

2.5k
2k
18
A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.
Project Owner Contributor

GamerGorl

brian-wagnerBrian Wagner

8.1k
1.7k
30
Automated barbecue and smoker on a budget
Project Owner Contributor

Smokey Mc Smokerson

hackershubHackersHub

2k
1.4k
3
*on a Dell Dimension E521, lol!
Project Owner Contributor

pfSense Router/Firewall Install

sarandisarandi

5.8k
1.3k
50
1/2 Watt stereo audio amplifier with extra gain and loudness control.
Project Owner Contributor

LM386 stereo audio amplifier

carbonosilciocarbono.silício

426
460
2
This project uses a 3D Printed Speaker "Cone" and Coil Bobbin as an audio exciter
Project Owner Contributor

3D Printed Audio Exciter

themixedsignalTheMixedSignal

324
373
4
Putting out wild fires using wind by firing rockets at central location of the wild fires so that the rocket generate enough blast wind.
Project Owner Contributor

Wildfires extinguisher

anteneh-gashawAnteneh Gashaw

41.5k
364
360
Why buying an expensive cyclone vacuum cleaner when you can build yourself one?
Project Owner Contributor

The DIYson, an open source Cyclone vacuum cleaner

madaeonMadaeon

936
5
2
low-cost methods to power boats from solar power
Project Owner Contributor

solar powered boat

sean-depagniersean d'epagnier

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday