Close

Recent Projects

Satellite Systems Simulator | Open Source | Accurate | Fun
Project Owner Contributor

Space Systems Lab

arnav-vArnav V

This is an 8 bit vacuum tube computer I built using recycled 1950s 6N3P double triode tubes I found in Eastern Europe a few years ago.
Project Owner Contributor

Vacuum Tube Computer

mikeMike

Many ATtinys share one wire. Any one can veto a number.
Project Owner Contributor

Lehmer's 1982 Number Sieve, Rebuilt With ATtinys

kbsriramkbsriram

A freeform brass wire sculpture featuring a round capacitive touch screen, 6-axis IMU auto-rotation, and reactive led filaments.
Project Owner Contributor

YUMO SMART CUBE: Touch screen/ESP32-S3 Brass Wire

yumobuildsYUMO.BUILDS

A hand-bent 1.5mm brass wire clock sculpture powered by ESP32-C3 with NTP time sync, hardware-multiplexed 7-segment display, and 5-stage SK
Project Owner Contributor

YUMO GLOBE

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

An ESP32-powered desk gadget with six round displays that appears to spin without any visible axle — the trick is mounting the frame on the
Project Owner Contributor

YUMO Roulette — A "Floating" Spinning Desk Gadget

yumobuildsYUMO.BUILDS

Corneal Topography Test in Miami | Advanced Eye Imaging
Project Owner Contributor

Corneal Topography Test in Miami

eyes-on-brickellEyes on Brickell

The project involves the development of an autonomous robotic system based on a 4-degree-of-freedom (4DOF) arm.
Project Owner Contributor

MeArm_Pick_Place

luca-fagioliLuca Fagioli

Open hardware and firmware that sit inline with a bench power supply, adding live measurement, protection, and SCPI control.
Project Owner Contributor

PSU-EXT

dzmitry-dydyshkaDzmitry Dydyshka

Open-Source Music Exploration Terminal based on M5Stack TAB5(ESP32-P4).
Project Owner Contributor

M5MusicTab5

fangbrbrFangbrbr

Building a home hifi component from scratch was a very early dream. There was finally an excuse to do it.
Project Owner Contributor

Ultimate stereo amplifier

lion-mclionheadlion mclionhead

The G-EDM is an electrical discharge machine that supports sinker EDM, EDM engraving, EDM drilling and Wire EDM operations. #Drahterodieren
Project Owner Contributor

G-EDM

gedm-devgedm-dev

Reimplement the TED chip of Commodore 264 series in FPGA
Project Owner Contributor

FPGATED

istvn-hegedsIstván Hegedűs

A 1,216-parameter transformer written entirely in HyperTalk, trained overnight on a Macintosh SE/30.
Project Owner Contributor

MacMind: A Transformer Trained in HyperCard

seanSean

I am working on a compact embedded project that can monitor the condition and behavior of a rechargeable battery
Project Owner Contributor

Designing a Smart Battery Health Monitor

deenjamespkdeenjames.pk

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday