Close

Recent Projects

Real-time speech-to-subtitle tool powered by whisper.cpp. Captures microphone audio in short chunks, transcribes and translates it
Project Owner Contributor

Spider Subtitler

thecatwomanTheCatwoman

4S UAV Quad W/ 3D Printed Frame utilizing a Pixhawk 6C Controller
Project Owner Contributor

UAV

rhea-raeRhea Rae

Building a mechanical television with parts only from the 1920s - provided possible.
Project Owner Contributor

Mechanical Television - only 1920s parts

paul-kocylaPaul Kocyla

A fully featured, open-source USB Power Delivery protocol/power analyzer and programmable sink for testing, logging, and debug.
Project Owner Contributor

Dr. PD

marco-tabiniMarco Tabini

A puzzle game played with the key.
Project Owner Contributor

Key Panic !

tokakentokaken

My watch runs off "disposable" lithium cells. I retrofit it to run like a grandfather clock: weights and gravity.
Project Owner Contributor

Gravity-Powered Digital Clock

ethanEthan

A standalone ESP32-based SINAD indicator with FFT and waveform monitoring for practical receiver evaluation.
Project Owner Contributor

A Pocket Digital SINAD Indicator Using ESP32

nobchanobcha

There are multiple ways to add floppy-sized storage to the Epson PX-8 or PX-4 computers. PFBDK offers a cheap, easy D.I.Y. solution.
Project Owner Contributor

PFBDK - EPSP floppy drive emulator

fjkraanfjkraan

The extension board with switches, buttons, leds, VGA output and general interfaces.
Project Owner Contributor

Evaluation board shield for Tang Nano 9k FPGA

pavelPavel

Leveraging the Programmable Power Supply (PPS) of USB PD 3.0 to make an ultra-compact bench power supply
Project Owner Contributor

PocketPD - USB-C Portable Bench Power Supply

centylabCentyLab

This project documents the progress of my ROS2 rover build. Plans: Mow, sweep, remove weeds in yard, snow removal and spread grit.
Project Owner Contributor

Multi purpose autonomous rover

zarrocZarroc

Automated Pressure Advanced Calibration for FDM 3D printer
Project Owner Contributor

Auto PA for 3D printer

markmark

A scalable multilayer charging station for 18650, and possibly even other battery types.
Project Owner Contributor

18650 Charging Tower

cyplesmacyplesma

Jumperlink is a board designed to make electronic connections easier to set up, maintain, and share compared to traditional jumper wires.
Project Owner Contributor

Jumperlink: A Smarter Way to Connect Electronics

dylan-zhengdylan zheng

BK7258 is connected to 2x2.16" 480x480 AMOLED, one L1+L5 frequency band GPS module, and one SIM7670G 4G module. And 4 sensors.
Project Owner Contributor

BK7258 240MHz+2x480MHz low-power IoT platform

eleclabElecLab

The Dactyl Lynx is a parameterized, split-hand, concave, columnar, ergonomic keyboard - a fork/rewrite of the original Dactyl keyboard.
Project Owner Contributor

Dactyl Lynx

david-h-bronkeDavid H. Bronke

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday