0%

0%

stephenbuck

Insatiable curiosity

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/02/2018.

My Projects

Tape I/O board, with support for multiple formats via micro controller DSP, for the RC2014 bus.

RC2014 Tape I/O Board

Projects I Like & Follow

The 2016 Hackaday Prize

Free and open source tool for exploring science and electronics anytime anywhere

Box0

kuldeep-singh-dhaka Kuldeep Singh Dhaka

I want to make a scale model VT100 terminal for use with my 2:3 scale PiDP-8/I.

2:3 Scale VT100 Terminal Reproduction

michael-gardi Michael Gardi

A five stage CPU core based on the MIPS instruction set

32 bit MIPS CPU

reed-foster Reed Foster

The 2016 Hackaday Prize

Quoting Einstein "If the bee disappeared off the surface of the globe then man would only have four years of life left.

Save the bees save the planet - IoT hive platform

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

Official Hackaday Prize Entry

A open source and cost conscious take on a connected plant propagator for monitoring, fun and ..propagation!

OPEN - Open Propagator with an Extensible Network

darren-blaxcell-aka-pork Darren Blaxcell, aka Pork

Mechanical Chicken Legs of Walking

mechaFeet

sarah-petkus Sarah Petkus

I Build a VT100 terminal 80 X40 colour characters using just a ATXMEGA2563AU and a 74lvc157

ATXMEGA VT100 Terminal

bert.hoogenboom

An RCA1802 Processor Card For RC2014

1802 CPU for RC2014

The 2018 Hackaday Prize

Like a Bus Pirate with more features and protocol support

Byte Theif

OK, most drill-presses have "force-feedback" in the normal sense... so this is a bit ridiculous.

drillPresseur - Drill-Press with Force-Feedback

eric-hertz Eric Hertz

With the push of a button you can dispense treats and watch your pet in real time without having to be in the same room.

IoT Treat Dispenser for Pets

The 2017 Hackaday Prize

Simple two-wheel robot built with lasercut LOFI blocks and Arduino compatible LOFI Brain controller

Rover robot

lofi-robot LOFI Robot

Need developer for my Moto Z mod phone project

Moto Mod

yogesh.engineer.uk

A simulation of a basic pulsed neural network, just slightly different than a traditional neural network.

Basic Pulsed Neural Network Simulation

The 2016 Hackaday Prize

Know what you are breathing wherever you go at anytime

Kuuki - Map your breath

rizzocharlotte rizzo.charlotte

Application framework for solving and sharing technical problems.

OneSolver.com

grant-pitel Grant Pitel

Interfacing a house heating system to collect temperature and energy readings remotely to optimise heater settings.

Heating system analyzer

erling_lindholm

View all

Bits

Michael Gardi wrote 02/12/2021 at 22:59

Thanks for following my 2:3 Scale VT100 Terminal Reproduction project Stephen.

Are you sure? yes | no