0%

0%

Todd Christell

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/09/2017.

My Projects

The 2017 Hackaday Prize

Monitor and control hydroponic garden using IUT.

Hydroponic Garden Control with IUT

3D printing a new rear shroud for small fan.

Fixing the Sleeping Fan

Projects I Like & Follow

A portable, rugged, self-contained system to suit all your RF SIGINT needs in every environment.

Raspberry Pi SDR Cyberdeck

tom-mladenov Tom Mladenov

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhaka Kuldeep Singh Dhaka

An off-grid communication solution capable of long distance transmission (10KM)

Off-grid LoRa Communicator

The 2017 Hackaday Prize

Or how to build a HF transceiver and learn along the way!

PUZZLE: radio building blocks

mdasilva M.daSilva

Creating copies of keys using a 3d printer and OpenSCAD

3d Printing real-world keys

dave-pedu Dave Pedu

Hack a Raspberry Pi case to include IR LEDs and the NoIR Camera module for a home CCTV setup

Raspberry Pi Night Vision Camera Hack

wesley-archer Wesley Archer

Creating four basic logic gates (AND, OR, NAND, NOR) from common vacuum tubes, powered at low voltages

Low Voltage Vacuum Tube Logic Gates

Native Python version of the BrewPi temperature controller.

Raspberry Pi Fermentation Controller

Quick and cheap connections to circuits

Clothespin PCB Probes

henry-york Henry York

Yes, I'm a sci-fi geek.

SWD-40: a 40% scale Special Weapons Dalek

jorj-bauer Jorj Bauer

Aiming for a low cost but high quality way of copying from super 8 cine film to a modern digital format.

Super 8 digitiser

themekon The_Mekon

Use composite Video instead of RF in your Tandy Micro Color Computer

MC-10 A/V mod Board

A sensor-packed dev board for Raspberry Pi that lets you build your IoT ideas.

MATRIX Creator

matrix-creator MATRIX Creator

The 2016 Hackaday Prize

I am upgrading my prusai3 to a massive build volume during which I will also be adding peristaltic pumps, for printing batteries

3d Battery Printer

Gizmowl from Brainstorm Magic is a new concept AI Owl Drone that talks and perhaps will fly.

Meet Gizmowl: AI Owl Drone (Flying Car?)

LiV Pi is an open source indoor air quality monitor. LiV Pi just learned to tweet.

Raspberry Pi: Python. Make your Raspberry Pi tweet

alfredc AlfredC

Christmas Tree lights controlled by an Arduino MKR1000 board

Christmas Tree IoT

javier-fernndez Javier Fernández

View all

Bits

danjovic wrote 11/12/2021 at 15:26

Thanks for liking my #MC-10 A/V mod Board !

Are you sure? yes | no