0%

0%

Aryaman

I'm a Interaction Designer who is interested in DIY solutions for complex problems.

United Kingdom

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/22/2023.

My Projects

Supplyframe DesignLab: 2023 Hackada…

An inclusive planning system for surfing by personalising goals and positive reinforcement to actively track and reward their progress.

Wave Forward

Projects I Like & Follow

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

Wearable prototype breadboard used as LED wristwatch

Breadboard Wristwatch

The 2017 Hackaday Prize

This project describes the use of Raspberry Pi as an IoT connected vital signs monitor. The HealthyPi HAT for Raspberry Pi used.

Connected Health: Open source IoT patient monitor

ashwin-k-whitchurch Ashwin K Whitchurch

The 2018 Hackaday Prize

A haptic glove that vibrates when its touches a virtual object. It also tracks physical finger positions and hand orientation.

DIY Haptic Glove for VR

dinithi-silva Dinithi Silva

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

The 2018 Hackaday Prize

This is low cost 3d printed robot arm based on Ikea Tertial lamp.

Tertiarm - 3d printed robot arm

anastascar anastas.car

Hackaday Prize 2019

I read opensurgery.net, and have a doubt. can we make some kind of surgery robot with maker utilities?

An Arduino Arm for ROS, wait a medical usage.

qq95538 qq95538

Working with RFID is so much fun, you can do alot with these tags like controlling relay, turing lights on off, access control, door lock

Arduino RFID Shield

bhaskaranil430 bhaskar.anil430

A high speed, highly sensitive piezoresistive sensor matrix that provides quantitative information related to prosthetic fit.

Piezoresistive sensor matrix

chriscoulston chris.coulston

This elegant timepiece, accentuated with a moiré pattern kinetic sculpture at its center, displays time with a vibrant array of LEDs.

The Moiré Clock

tamarisk-labs Tamarisk Labs

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

A twinkly star PCB ornament

ATtiny13A PCB Star Wearable

alexandra-covor Alexandra Covor

Ambient LED artwork created by playing an animated GIF in extreme slow motion with high LED refresh rate, and interpolation between frames.

Continuum - Slow Motion LED Art Display

louis-beaudoin Louis Beaudoin

When does collecting things become an addiction.

Circa 1910 Electrotherapy/home medical device

boris-van-galvin Boris van Galvin

Hackaday Prize 2020

Making fluid warmers accessible to relief camps and dispensaries

The 3$ Fluid Warmer

Two 555 timers and oscilloscope X-Y mode to generate animated art

Oscilloscope Art using 555 Timers

ted-fried Ted Fried

A homebuilt Z80 Computer with CP/M which can run historic software

The ZX2022

doctor-volt Doctor Volt

View all

Bits