0%

0%

HIGHVOLTOMANIAC

I'm an electrical engineering student in Canada

Ontario, Canada

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/26/2022.

My Projects

A bluetooth musical tesla coil, but fully on a pcb, NO COILS, and also only powered by one 12v supply.

BLUETOOTH MUSICAL PCB TESLA COIL

HIGHVOLTOMANIAC

Projects I Like & Follow

There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.

I Made my own Audio Bluetooth module

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

Hackaday Prize 2020

Wish your loved one with this Happy Birthday Music with arduino Happy Birthday with arduino code

Happy Birthday Music Song Using Arduino Uno

spark-buzzer spark buzzer

M-Bus Shield for smartmetering with Arduino MKR

Arduino M-Bus Master Shield

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boardscom land-boards.com

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

Making a GoPro like action camera using the Raspberry Pi Zero at the heart of it all

Raspberry Pi Zero Action Camera

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

Hackaday Prize 2020

It's DIY Pulse Oximeter using cheap and general parts and 3D printer, not need dedicated parts.

DIY Pulse Oximeter w/o dedicated parts

pionejp-channel piONE.jp channel

Rotary Encoder with USB Interface based on ATtiny85

ATtiny85 TinyKnob

stefan-wagner Stefan Wagner

21 Silicon Wafers, the kinds used to make computer chips, arranged on laser-cut acrylic & held in place with 3D-printed Stargate Chevrons

Silicon Wafer Wall Artwork

rium-mike-ando RIUM+ (Mike Ando)

WART may be the the worst sounding audio playback systems ever created. But it's six lines of code and works on the tiniest processors.

WART: (really) cheap audio playback

r-d-poor R. D. Poor

IR Clone is an open-source infrared remote control signal analysis and generating tool.

IR Clone

dilshan-jayakody Dilshan Jayakody

A fuzzy, glowing, touch-responsive serpent using ROS + SOTA machine learning to make lifelike behavior.

Love Elemental

david-greenberg David Greenberg

This robot is designed for supporting human in some specific condition, by take advantages of its special rotating forward mode.

Brain controlled multifunctional rolling robot

haohong-wang Haohong Wang

Predict the possibility of arrhythmias on an 8- bit Microcontroller, without sending the corresponding sensor data to the cloud.

Tiny ML for Big Hearts on an 8-bit Microcontroller

alexmiller alex.miller

View all

Bits