0%

0%

Bryan Herrera

I am a mechanical engineer. I enjoy designing and 3D printing robotics.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/27/2024.

My Projects

This is an arduino based IR controlled turret robot. It can rotate, tilt, and fire darts.

IR Turret Robot

bryan-herrera Bryan Herrera

Things I've Built

IR Turret Robot

If you are a fan of Mark Rober like myself, then you have probably heard of his hack pack robotics kits. I was excited for the hack pack to launch for adults, but the engineer in me couldn’t help but think that I could build the same robot with

Projects I Like & Follow

The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education

LittleArm: 3D Printed Arduino Robot Arm

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

The 2016 Hackaday Prize

Pi Zero Smart Glass can help you identify objects using image recognition technology. Easily make your own smart glasses with the Raspberry

Raspberry Pi Zero Smart Glass

ricardo-ferro Ricardo Ferro

The 2016 Hackaday Prize

Got a Raspberry Pi ? A few more bucks turn it into a networked SPI Flash chip reader/writer

SPI Flasher

yann-guidon-ygdes Yann Guidon / YGDES

The 2016 Hackaday Prize

Decentralized Autonomous Interconnected Systems for Energy Efficiency - A blockchain based energy DAO

[2016] InternetS of Energy - Call me DAISEE

rieul-techer Rieul Techer

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

(ab)use the I2S + DMA on the ESP8266 to drive some WS2812(b)'s.

ESP8266 DMA I2S WS2812 Driver

Building a semi-practical backyard railway using parts from the local hardware stores, and 3D printing for the rest (for now)

Somewhat 3D printed backyard railway

How to make a small FM Radio with oled display which all functions are controlled by a single rotary encoder.

DIY Arduino Due TEA5767 FM Radio

mircemk mircemk

Full tutorial on how to build a conveyor belt 3D printer. I provide completely free and opensource CAD and firmware to build this printer.

Print HUGE parts with Conveyor Belt 3D Printing

swaleh-owais Swaleh Owais

In this Project, my 20 years old alarm system gets an upgrade, email and SMS warnings replace the old phone calling notification.

Raspberry Alarm Upgrade

brieuc-du-maugour Brieuc du Maugouër

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

This project has an esp8266 giving Wi-Fi functionality, LoRa module, 1.8 inch TFT display and buttons. You can make LoRa Remote or messenger

LoRa Remote Control Messenger With a 1.8" TFT

akarshagarwal98

This project is using the Arduino Nano and WS2811 LEDs for a 50 channel (cues) remote firework firing system.

Programmable firework firing system with remote

w-jason-altice W. Jason Altice

The 2016 Hackaday Prize

Pony Bot

dehipu deʃhipu

Kamal Mostafa's minimodem clone in JavaScript

minimodem.js

pablogs pablogs

Robotic arm controlled with mental push commands.

Humanoid robotic arm with EEG control

ChatterPi is a software package that turns a Raspberry Pi into a low-cost audio servo controller for talking props.

ChatterPi

aspiring-roboticist Aspiring Roboticist

View all

Bits