0%

0%

RetroAndGaming

A guy - with a lab - loves to code - loves to tinker

Norway

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/05/2023.

My Projects

A tapuino build inside an original commodore cassette deck. And getting the counter mechanism working as well.

A Tapuino in a Commodore Cassette Deck

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Reverse engineering the SMA-Q2 smartwatch to run open source firmware on it

Color Open Source Smartwatch

emeryth emeryth

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

johannes-hassler Johannes Hassler

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Following the work of https://openservo.org/ , continue development on bringing high quality digital servos for robotics

OpenServo 2.0

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Supplyframe DesignLab: 2022 Hackada…

Modular open hardware robot for uROS2 & Microblocks

Rosmo robot

Measurement of uncomplicated electrical consumption using a powerful Blynk Dashboard

Meter PZEM-004 + ESP8266 & Platform IoT Blynk App

Automate cell information readout from a Liitokala Lii-500 charger by tapping into it's LCD interface

Li-Ion Charger Automation

The 2018 Hackaday Prize

The ESPWear is a development board for wearables with WiFi using the ESP8266 as core.

ESPWear - ESP8266 for Wearables

pedro-minatel Pedro Minatel

A simple 3D printed Arduino robot to introduce kids to STEM topics.

LittleBot

M-BUS HAT to extend your Raspberry Pi with smartmetering functions

M-BUS HAT for Raspberry Pi

Beginner IoT project with RN4870 Bluetooth Low Energy Module

IoT Geiger Counter with RN4870 BLE Module

florian-wilhelm-dirnberger Florian Wilhelm Dirnberger

New open source hardware 1U satellite project.

New open source hardware 1U satellite project.

tranvinhquang TRAN.VINH.QUANG

Monitoring parameters of Greenhouse located at remote location (with no Internet Connectivity), using LoRa IoT

Greenhouse Monitoring System - LoRa IoT

We are talking about the reinforcement of printed parts. I plan to reinforce the part during printing with a fiberglass paint mesh.

Reinforcement with fiberglass mesh in 3d printing

View all

Bits