0%

0%

Sergey Mironov

Develop mobile DIY robot for everybody. It's useful and free of charge. Use 3D printing.

Russia, Moscow

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/13/2016.

My Projects

If you want to make your own PCB and you've got a 3D printer or DIY, use Diode Laser Etching instead of ironing.

Diode Laser Etching of a PCB. DIY From a to Z.

sergey-mironov Sergey Mironov

The 2016 Hackaday Prize

you can make your telepresence robot (Arduino based) if you go through the steps below

Easy Build my own useful Robot For Less Than $100

sergey-mironov Sergey Mironov

Things I've Built

Endurance

lasers (diode,

Projects I Like & Follow

Thanks to the hardwork by Richard Sloan and Ivan Grokhotkov, we can now use Arduino IDE to write sketches that would run ON the ESP8266.

Arduino IDE for ESP8266 Quickstart Guide

hari-wiguna Hari Wiguna

The 2015 Hackaday Prize

Affordable, light-weight, anthropomorphic prosthetic hands, using a novel selectively-lockable differential mechanism.

OpenBionics Affordable Prosthetic Hands

The 2015 Hackaday Prize

The Tick Tock Timer is a School Bell timer packed with features

Tick Tock Timer

This project is aMicroUSB powered ESP8266 Oled Display. It can be used to display Weather Information or Wifi SSID Information.

MicroUSB powered ESP8266 Oled Board

0miker0 0miker0

A FPGA based ambilight clone with analog input.

AmbiController

The 2015 Hackaday Prize

An Internet of Things Device to Let My Aging, Disabled Father Know that the Stove is Off, and Ease His Paranoia...

An IOT Device That Tells Dad the Stove is Off.

casual-cyborg Casual Cyborg

The SlushEngine is an advanced stepper motor driver that works with the Raspberry Pi to move motors with precision, speed, and simplicity.

SlushEngine Stepper Motor Driver

A beginner project exploring the capabilities of the ESP8266 with a WiFi-controllable tank robot

ESPtank

benjamin-broce Benjamin Broce

The 2016 Hackaday Prize

An all-in-one development platform featuring a Raspberry Pi, an Arduino, a HDMI display screen and a breadboard area.

Pi/Arduino Prototyping

craig-hissett Craig Hissett

A little two wheeled diferential robot with SLAM

Mapbot

brian-kame brian kame

Official Hackaday Prize Entry

Internet of Things rapid prototyping platform.

Aquila IoT Platform

My most complex project so far - an adult size humanoid robot.

Humanoid robot

malte-ahlers Malte Ahlers

The 2016 Hackaday Prize

This doodad transforms a 2L pop bottle and a .5L plastic bottle into a solar distillery for drinkable water.

3D-Printed Water Distillation Doodad

The 2016 Hackaday Prize

Distance measurement using 2 cameras and triangulation

Distance measurement with 3D camera

The 2015 Hackaday Prize

In my professional life I deal with serial devices Ad Nauseum. Sometimes they're remotely located. This makes remote control easier!

Send serial to Comtrol Devicemaster with Arduino

A kit that demystifies robots for children using first assembly, then sequential programming.

HAL-e Robot Kit for Kids

Phaethon

fais avec du recyclage d'imprimant et de tige fileté

mon imprimant 3d

View all

Bits