0%

0%

Joel

-

Sweden

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/28/2019.

My Projects

An arduino-based temperature controlled soldering station for the ubiquitous T12 clones.

YATSS (Yet another T12 soldering station)

Projects I Like & Follow

Hackaday Prize 2019

I didn't have enough to buy a Lab Bench PSU... So I made one.

OPEN Power

john-loeffler John Loeffler

Hackaday Prize 2019

The Probe-Scope is an open source 60MHz 250Msps oscilloscope probe with all guts built right in, that plugs directly into your PC via USB

60MHz Bandwidth 250Msps Probe-Scope

mark-omo Mark Omo

Portable electronic device to measure air and noise pollution

Street Sense

mike-teachman Mike Teachman

Each axis: ̶$̶5̶ ̶$̶8̶ $10 motor+lead screw, 3x LM6UU, 3x 6mm x 100mm rod, 1/8in hardboard, PC case screws

Minamil 2dc: a minimal CNC mill

paul-mcclay Paul McClay

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Hackaday Prize 2019

A tool invented to make use of a extremely durable, cheap and ubiquitous material that allows to make things simply, from PVC pipes.

The Pipeline Project

christophe-machet Christophe Machet

3D Print yourself some of these magazines to keep your shop organized and boost your pick and place productivity!

SMD Component Magazines

robin-reiter Robin Reiter

An affordable, durable, bespoke prosthetic hand system developed in and for low-income settings

Hintha Modular Prosthetic Hand

jason-bender Jason Bender

Teardown and analysis of the PCB in a Rocket Racers micro "pop-can" car

Micro RC Car Teardown

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

Hackaday Prize 2019

USB powered and easy upgradable SAM D11 based controller

DIXI RT - USB soldering pen for WELLER RT

Commander un relais iot avec ESP-01 via SmartThings

Relais ESP-01 iot sur SmartThings

erik-tellier Erik Tellier

Experimenting with 3D printed tools.

3D Printed Opensource Tools

I am not that impressed with auto-routers. Why are they so bad?

My Auto-Router

agpcooper agp.cooper

The Cavendish Electrical Co Ld, Home Medial Unit

Vintage Electro Therapy Devices

boris-van-galvin Boris van Galvin

The aim of this project is to design a flexible PCB that can be attached to a coffee cup and will visually represent the temperature.

Flexible Coffee Cup Buddy

A HiFi headphone amp HAT for Raspberry Pi with balanced and unbalanced output

HiFiPi-portable

An IR led transmits an encoded bit pattern which is modulated at 38Khz and is decoded at the reciever end using TSOP1838 on LPC2148.

PATTERN RECOGNITION USING IR

Pragya Choudhary

View all

Bits