0%

0%

elowe5

Electronics Student and hobbyist

UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/16/2019.

My Projects

Hand motion sensor with accelerometers, gyroscope, and flex sensors

Bluetooth hand motion sensor

Projects I Like & Follow

The 2017 Hackaday Prize

A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.

DIY Polishing Station for 3d-printed Parts

The 2016 Hackaday Prize

Always wanted to unleash the power of an FPGA chip? Interested in robotics and vision? Then this might be the project for you!

FPGA-based camera vision for everyone

dennisvanelteren

Use your PIC-Projects on Mini-PCIe (USB/SMBus)

Mini-PCIe - PIC18LF2550 - DevBoard

Demo loops and interactive games and displays made with Arduino Uno and Mega Controlling 32x32, 32x64 and 64x64 RGB Matrix panels

RGB LED matrix panels (Arduino)

joshua-snyder Joshua Snyder

The 2016 Hackaday Prize

Pushing the limits of tiny robotics - MiniPIDDY is a miniturized version of my PIDDYbot - a Self Balancing Robot.

Worlds Smallest Balancing Robot? MiniPIDDY

sean-hodgins Sean Hodgins

A sleeker case for the bulky BMW proximity key fob.

3D print a thinner car key

CAN Bus Arduino Clone

The 2017 Hackaday Prize

4x5 micro display with attiny85

Standalone LED micromatrix display

Hackaday Prize 2019

A DIY flexible keyboard project; instead of using silicone, a SLA highly flexible resin is used.

DIY Flexible keyboard without using silicone

madaeon Madaeon

Hackaday Prize 2019

This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes

Droid Trooper

victor-serrano Victor Serrano

An Arduino Zero compatible motor driver for robotics projects.

ZeroDriver

mahesh-venkitachalam Mahesh Venkitachalam

The 2018 Hackaday Prize

Electromagnetic Lifting Module

ELM

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

ARM based Motion Controller for CNC, 3D-printer, Laser-cutter,.. 6 Axis, Helical, S-Profile

Mooov Motion Controller

pascal-roobrouck Pascal Roobrouck

I made this project in order to build a cost effective surveillance car which can be controlled over the Internet or on any private network.

Surveillance Car Controlled via DTMF

varun-kumar Varun Kumar

The 2018 Hackaday Prize

ALio is the new prototype board design that combine SMD and PTH at the same time. In short you are freely to use SMD or PTH without much ext

ALio : New Hardware Prototyping Platform.

arief-ibrahim-adha arief ibrahim adha

The 2018 Hackaday Prize

SolarUPS devices can provide for constant, uninterruptible low voltage system power supply for low consumption equipment

SolarUPS V3 Solar Uninterruptible Power Supply

gabor-futo Gabor Futo

This project will be the access point for my nRF24L01+ (mesh) network.

nRF24L01+ network internet access point

Peetselectronics

View all

Bits