0%

0%

gearscodeandfire

11-year-old boy in a man's body pretending to be a 25-year-old Youtuber.

Near NYC

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/26/2023.

My Projects

Dreaming of an edgy suburbia, I've turned walkway lights into a network of fire-shooting propane canisters, all commanded on cue.

Programming Propane: ESPNow and Walkway Upgrades

gearscodeandfire

I use an RC remote and receiver, an esp32, high-current motor drivers, servos, an FPV camera, and a little propane.

Ghost Toddler: esp32 FPV pan tilt Power Wheels

gearscodeandfire

3d printed devices that live on my neighbors' wifi and alert them to impromptu gatherings in my workshop, which is also my bar.

ESP32 Personal Bat Signals with Light and Sound

gearscodeandfire

Projects I Like & Follow

In this project, I will build a desktop-sized MRI that is inexpensive and can be built by anyone.

Home Made MRI

yashiro yashiro

Motivation to do some software projects by writing them down.

Silly software wishlist

lion-mclionhead lion mclionhead

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Reduce/Eliminate Elephants Foot from 3d printed parts

REEF method for 3d resin printing

Angle of arrival 2.4GHz radio signal direction finding

Micro MUSIC

charlie-smith Charlie Smith

Hackaday Prize 2019

I read opensurgery.net, and have a doubt. can we make some kind of surgery robot with maker utilities?

An Arduino Arm for ROS, wait a medical usage.

qq95538 qq95538

J1772 EVSE firmware for ESP32 based devices

esp32-evse

miroslav-dzrik Miroslav Dzúrik

This project is using the Arduino Nano and WS2811 LEDs for a 50 channel (cues) remote firework firing system.

Programmable firework firing system with remote

w-jason-altice W. Jason Altice

2021 Hackaday Prize

Reliable hardware designed by robots

SOL75 - a 3D customizer

Raspberry Pi Pico misses out on an EEPROM, so why not add it by ourselves, that too EEPROMs are dirt cheap.

How to Add an EEPROM to Raspberry Pi Pico

This is an audio application that produces 3D binaural audio from 2D mono audio samples and positional information given by GUI.

Binaural Audio Editor

pablo-antonio-camacho-jr Pablo Antonio Camacho Jr.

this is a bad fun idea...

doomba

kyle-brinkerhoff Kyle Brinkerhoff

Supplyframe DesignLab: 2022 Hackada…

The robot can draw a picture on a wall I name it is "Fumik"

Wall Drawing Robot, Open Source

Idea of combining Acryl and LEDs with printed circuit boards to create a PCB art object.

ATOMPUNK ROCKET LAMP MADE OF BARE PCBS AND LED-LIT

After fracturing my big toe I made a 3d printed splint from my CT scan.

3d Printed Toe Splint

An STM32-based guitar processor

FXcursion

This is a smart IoT project that uses a motion detector to detect motion and open and close a water valve automatically.

Smart Water Tap Leakage Controller IoT Project

View all

Bits