0%

0%

pepski

Tech exploration is my playground, from childhood playingith gadgets to unraveling Python, C++, Arduino. Dive into

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/21/2024.

My Projects

Could someone help me with this wifi minicam

Projects I Like & Follow

Supplyframe DesignLab: 2023 Hackada…

Open-Source Infrared Remote Using ESP32 and LVGL

OMOTE - DIY Universal Remote

Students learn to melt solder, layout PC boards, use tools, and troubleshoot by building an analog, discrete component receiver.

High Schoolers Build a Radio Receiver

This BTTF remote control has working speed via wireless transmission from the speed box.

Back-to-the-Future Remote Control Build

w-jason-altice W. Jason Altice

This is a simple beginner DIY project with low component count and small budget.

7 Band Audio Spectrum Analyzer

samm928 samm928

ATmega8 is smaller version of Mega328, but due to pin compatible DIP version we can replace Uno's MCU with this chip.

Getting started with ATMEGA8 and clone board.

Circuit sculpture: a table-top satellite model that shines and measures light (and is environmentally friendly).

A little CSK satellite for a bright workstation

andrea-console Andrea Console

SatIntel is an OSINT tool for Satellites. Extract satellite telemetry, receive orbital predictions. and parse TLEs

SatIntel: OSINT Tool for Satellites

angelina-tsuboi Angelina Tsuboi

New open source hardware 1U satellite project.

New open source hardware 1U satellite project.

tranvinhquang TRAN.VINH.QUANG

Clean hack of the otherwise very solid ART DJ-Pre II phono preamp with the aim of improving the existing design and enhancing its features

Audio - Phono preamplifier boost

Accelerate IoT application development with ksIotFrameworkLib!

IoT framework for Arduino-esp32/8266

Automated Plant Watering System on ESP32-Basis

Plantomation V1.0

TPM 2.0 with USB interface based on Infineon OPTIGA™ SLB9672 FW 15.23. Full TSS2 integration as a TCTI-device

LetsTrust-TPM2Go

paul-kissinger Paul Kissinger

Attempt to add even more Retro Spirit to Hackaday Supercon'19 badge :)

Spirit Retro Handheld

Make time frustrating

Ternary clock

ken-yap Ken Yap

RDA5807M FM mini-radio with STM32F030F4 controller and 0.91" OLED

RDA5807M FM mini-radio

Calibrate the XY offset of your printer by printing on a piece of paper and scanning it

3D printer XY calibration using a scanner

martijn-schouten Martijn Schouten

The HPDL-1414 is a 16-segment LED display with four printable fields that is over twenty years old.

HPDL1414 Micro Clock with Arduino

mircemk mircemk

As a beginner, this article helps you come up with various ideas on what you can start doing using your Raspberry Pi.

The best Raspberry Pi projects for beginners

View all

Bits