PROSTHETIC_HAND_HARD_PARTS.stl

These are the hard 3D printed parts for the actual hand prototype

Standard Tesselated Geometry - 6.86 MB - 05/08/2018 at 22:29

Download

INTERNAL_MOLD.stl

This is one of a three piece mold for casting the prosthetic hand silicone skin.

Standard Tesselated Geometry - 4.36 MB - 05/08/2018 at 22:29

Download

3DSCAN_HAND.stl

This is a slightly modified version of the original hand 3D Scan the mold is based on. I'm posting the raw scan in the GitHub repository for this project.

Standard Tesselated Geometry - 4.82 MB - 05/08/2018 at 22:29

Download

BOTTOM_MOLD.stl

This is one of a three piece mold for casting the prosthetic hand silicone skin.

Standard Tesselated Geometry - 2.43 MB - 05/08/2018 at 22:29

Download

SILICONE_SKIN_HAND_BATTERY_AND_ACTUATOR_ENCLOSURE.stl

This enclosure fits a Firgelli linear actuator and two 18650 size 3.7v rechargeable batteries

Standard Tesselated Geometry - 39.44 kB - 05/08/2018 at 22:29

Download