Close
0%
0%

Wireless FPV Quadcopter

A quadcopter that streams live video back to the pilot. It's controlled with a PS2 controller.

adam-oakleyAdam Oakley
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
5.3k views
3 comments
113 followers
View Gallery
A couple friends and I built this quadcopter as our final project for ECET: Computer Control at BCIT. We wanted to make a UAV that could be used remotely to capture live video, or could be given a route to fly using GPS. While we ran out of time to implement the GPS features, we did successfully produce a flying quadcopter that streamed live video.

We designed and built a 100% 3D printed frame for the quadcopter. The plastic frame is strong and also quite light. To control the quadcopter, we use an Arduino Nano to read a PS2 controller. The controller data is then transmitted to the quadcopter using a pair of NRF24L01+ modules. A 2.4GHz camera sends video back to the pilot's receiver.

  • 1 × NanoWii Flight Controller An arduino-based controller board with integrated Accelerometer and Gyroscope
  • 2 × NRF24L01+ Module 2.4GHz Transceiver with SPI interface
  • 1 × 3000mAh Lithium Battery Provides 15-20 minutes of flight time
  • 4 × 100W Brushless Motor Lightweight with plenty of available power and built in speed controller
  • 1 × Wireless Camera NTSC camera with integrated 2.4GHz transmitter

View all 7 components

  • 1
    Step 1

    Download the model files here:

    https://dl.dropboxusercontent.com/u/31512672/Quad%...

    The STL files for 3D printing are provided as well as Inventor 2014 files if you want to make any edits.

    You'll also need various #4 machine screws and hardware like lock washers and nuts. I use acetone to glue some of the plastic pieces together.

  • 2
    Step 2

    You'll need to print these pieces:

    2x Body

    1x Bottom

    4x Bottom_supports

    4x Arm

    4x Motor_mount

    4x Arm_foot

  • 3
    Step 3

    Use acetone to glue the motor mounts to the arm pieces. Allow the arms to dry and flip them over. Glue a foot piece to each arm.

View all 6 instructions

Enjoy this project?

Share

Discussions

RX HMP wrote 10/03/2016 at 20:21 • point

guys can i remove spektrum dx6 dms module and use the nfl transmitter? Im stuck with a good dx6 with dms only and cant get a dms 6ch receiver, so Im thinking exchange it?

what range is the nfl good for? 100m? and will it connect to dms2 might be dsm lol dmsx flysky esky 2.4ghz? receivers? this controller locked to the stupid dms only. Please help.

Id also like to talk about parrot ar2.0 and apm2.6. I have multiple project quads. please get intouch.

  Are you sure? yes | no

Adam Oakley wrote 10/03/2016 at 21:05 • point

I would not recommend these NRF modules, at least not the cheap ones from China. The range is much less than 100m. I'm not familiar with the other things you mentioned so I can't help with them.

  Are you sure? yes | no

Chuma A wrote 08/08/2015 at 18:29 • point

Hello,

I'm trying to build a UAV like yours. Which material did you print with: PLA or ABS?

  Are you sure? yes | no

Similar Projects

Quadcopter build from scratch using carbon fiber tube frame, custom control HW based on STM32F3 MCU and custom FW using CMSIS RTX RTOS.
Project Owner Contributor

Just another quadcopter from scratch project

kevarekkevarek

A Steadicam + Hyperlapse + Motion Control Photography Robot
Project Owner Contributor

Steady Shot Bot

steady-shot-botSteady Shot Bot

Real racing in a real world
Project Owner Contributor

FULLMETAL RACER

frederico-sobreiraFrederico Sobreira

A video game controller that allows you to swap control modules (analog sticks, buttons, D-pads, knobs, etc.) and works with any console
Project Owner Contributor

Modular Gamepad: swappable controls, any console

pointyointmentPointyOintment

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Wireless FPV Quadcopter", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.